esp8266-arduino-wifirgb

A RESTful API implementation to control an RGB LED Strip using an ESP8266 microcontroller. Supports RGB or HSV color model. There is a german post on my blog containing more details about the project.

Schematics

The circuit uses an LD1117V33 voltage regulator with two capacitors as specified in the datasheet. The connection of the ESP-12 is spoecified in th the improved stability schematic of the ESP8266 for Arduino. Three IRLB8721 N-channel MOSFETs (one per RGB Stripe channel) are used as power transistors to save our ESP-12 from an early death. The two tactile switches are added for easier programming.

Code

Dependencies

The mentioned versions are tested, other may work as well but may lead to compile issues.

Configuration

In the main Arduino Sketch WifiRGB.ino some changes need to be done before uploading to the ESP8266 microcontroller.

Wifi Network Settings

Required network settings are the Network SSID and password:

const char* ssid = "your_ssid";
const char* password = "your_wifi_password";
const char* deviceName = "wifi-rgb";

You can choose between a static or -with DHCP- dynamic IP adress. Default is an static IP adress configured in the following code block:

IPAddress clientIP(192, 168, 178, 250); //the IP of the device
IPAddress gateway(192, 168, 178, 1); //the gateway
IPAddress subnet(255, 255, 255, 0); //the subnet mask

If you want to use DHCP just ignore those settings and comment or remove the following line:

WiFi.config(clientIP, gateway, subnet);

Internal LED

The internal microcontroller LED is used to indicate the Wifi connection status.

#define BUILTIN_LED 2 // internal ESP-12 LED on GPIO2

RGB Output Pins

If you want to use own schematics you can adjust the different output channels in the following code block.

#define REDPIN 12
#define GREENPIN 14
#define BLUEPIN 5

Usage

RESTful API

The controller accecpts POST request at http://ip-adress/api/v1/state. The request must contain one of the following JSON objects in body.

RGB

{
  "state": "ON",
  "brightness": 100,
  "color": {
    "mode": "rgb",
    "r": 255,
    "g": 125,
    "b": 75
  },
  "mode": "SOLID"
}

HSV

{
  "state": "ON",
  "brightness": 100,
  "color": {
    "mode": "hsv",
    "h": 250,
    "s": 50,
    "v": 50
  },
  "mode": "SOLID"
}

Graphical User Interface

A User Interface using iro.js is available at http://ip-adress/ui. An Internet connection is required to load additional Javascript libraries from CDN.

License

Bugs

See https://github.com/c-klinger/esp8266-arduino-wifirgb/issues.

GitHobi/esp8266-arduino-wifirgb