/r3

libr3 is a high-performance path dispatching library. It compiles your route paths into a prefix tree (trie). By using the constructed prefix trie in the start-up time, you may dispatch your routes with efficiency

Primary LanguageCMIT LicenseMIT

R3

Build Status

Coverage Status

R3 is an URL router library with high performance, thus, it's implemented in C. It compiles your route paths into a prefix trie.

By using the prefix tree constructed in the start-up time, you can dispatch the path to the controller with high efficiency.

Requirement

Build Requirement

  • autoconf
  • automake
  • check
  • pkg-config

Runtime Requirement

  • pcre
  • (optional) graphviz version 2.38.0 (20140413.2041)
  • (optional) libjson-c-dev

Pattern Syntax

/blog/post/{id}      use [^/]+ regular expression by default.
/blog/post/{id:\d+}  use `\d+` regular expression instead of default.

API

#include <r3/r3.h>

// create a router tree with 10 children capacity (this capacity can grow dynamically)
node *n = r3_tree_create(10);

int route_data = 3;

// insert the route path into the router tree
r3_tree_insert_path(n, "/bar", &route_data); // ignore the length of path

r3_tree_insert_pathl(n, "/zoo", strlen("/zoo"), &route_data );
r3_tree_insert_pathl(n, "/foo/bar", strlen("/foo/bar"), &route_data );

r3_tree_insert_pathl(n ,"/post/{id}", strlen("/post/{id}") , &route_data );

r3_tree_insert_pathl(n, "/user/{id:\\d+}", strlen("/user/{id:\\d+}"), &route_data );


// if you want to catch error, you may call the extended path function for insertion
int data = 10;
char *errstr = NULL;
node *ret = r3_tree_insert_pathl_ex(n, "/foo/{name:\\d{5}", strlen("/foo/{name:\\d{5}"), NULL, &data, &errstr);
if (ret == NULL) {
    // failed insertion
    printf("error: %s\n", errstr);
    free(errstr); // errstr is created from `asprintf`, so you have to free it manually.
}


// let's compile the tree!
char *errstr = NULL;
int err = r3_tree_compile(n, &errstr);
if (err != 0) {
    // fail
    printf("error: %s\n", errstr);
    free(errstr); // errstr is created from `asprintf`, so you have to free it manually.
}


// dump the compiled tree
r3_tree_dump(n, 0);

// match a route
node *matched_node = r3_tree_matchl(n, "/foo/bar", strlen("/foo/bar"), NULL);
if (matched_node) {
    int ret = *( (int*) matched_node->data );
}

// release the tree
r3_tree_free(n);

Capture Dynamic Variables

If you want to capture the variables from regular expression, you will need to create a match_entry object and pass the object to r3_tree_matchl function, the catched variables will be pushed into the match entry structure:

match_entry * entry = match_entry_create("/foo/bar");

// free the match entry
match_entry_free(entry);

And you can even specify the request method restriction:

entry->request_method = METHOD_GET;
entry->request_method = METHOD_POST;
entry->request_method = METHOD_GET | METHOD_POST;

When using match_entry, you may match the route with r3_tree_match_entry function:

node *matched_node = r3_tree_match_entry(n, entry);

Release Memory

To release the memory, you may call r3_tree_free(node *tree) to release the whole tree structure, node*, edge*, route* objects that were inserted into the tree will be freed.

Routing with conditions

// create a router tree with 10 children capacity (this capacity can grow dynamically)
n = r3_tree_create(10);

int route_data = 3;

// insert the route path into the router tree
r3_tree_insert_routel(n, METHOD_GET | METHOD_POST, "/blog/post", sizeof("/blog/post") - 1, &route_data );

char *errstr = NULL;
int err = r3_tree_compile(n, &errstr);
if (err != 0) {
    // fail
    printf("error: %s\n", errstr);
    free(errstr); // errstr is created from `asprintf`, so you have to free it manually.
}


// in your http server handler

// create the match entry for capturing dynamic variables.
match_entry * entry = match_entry_create("/blog/post");
entry->request_method = METHOD_GET;


route *matched_route = r3_tree_match_route(n, entry);
matched_route->data; // get the data from matched route

// free the objects at the end
match_entry_free(entry);
r3_tree_free(n);

Slug

A slug is a placeholder, which captures the string from the URL as a variable. Slugs will be compiled into regular expression patterns.

Slugs without patterns (like /user/{userId}) will be compiled into the [^/]+ pattern.

To specify the pattern of a slug, you may write a colon to separate the slug name and the pattern:

"/user/{userId:\\d+}"

The above route will use \d+ as its pattern.

Optimization

Simple regular expressions are optimized through a regexp pattern to opcode translator, which translates simple patterns into small & fast scanners.

By using this method, r3 reduces the matching overhead of pcre library.

Optimized patterns are: [a-z]+, [0-9]+, \d+, \w+, [^/]+ or [^-]+

Slugs without specified regular expression will be compiled into the [^/]+ pattern. therefore, it's optimized too.

Complex regular expressions will still use libpcre to match URL (partially).

Performance

The routing benchmark from stevegraham/rails' PR stevegraham/rails#1:

             omg    10462.0 (±6.7%) i/s -      52417 in   5.030416s

And here is the result of the router journey:

             omg     9932.9 (±4.8%) i/s -      49873 in   5.033452s

r3 uses the same route path data for benchmarking, and here is the benchmark:

            3 runs, 5000000 iterations each run, finished in 1.308894 seconds
            11460057.83 i/sec

The Route Paths Of Benchmark

The route path generator is from stevegraham/rails#1:

#!/usr/bin/env ruby
arr    = ["foo", "bar", "baz", "qux", "quux", "corge", "grault", "garply"]
paths  = arr.permutation(3).map { |a| "/#{a.join '/'}" }
paths.each do |path|
    puts "r3_tree_insert_path(n, \"#{path}\", NULL);"
end

Function prefix mapping

Function Prefix Description
r3_tree_* Tree related operations, which require a node to operate a whole tree
r3_node_* Single node related operations, which do not go through its own children or parent.
r3_edge_* Edge related operations
r3_route_* Route related operations, which are needed only when the tree is defined by routes
match_entry_* Match entry related operations, a match_entry is just like the request parameters

Rendering Routes With Graphviz

The r3_tree_render_file API let you render the whole route trie into a image.

To use graphviz, you need to enable graphviz while you run configure:

./configure --enable-graphviz

Here is the sample code of generating graph output:

node * n = r3_tree_create(1);

r3_tree_insert_path(n, "/foo/bar/baz",  NULL);
r3_tree_insert_path(n, "/foo/bar/qux",  NULL);
r3_tree_insert_path(n, "/foo/bar/quux",  NULL);
r3_tree_insert_path(n, "/foo/bar/corge",  NULL);
r3_tree_insert_path(n, "/foo/bar/grault",  NULL);
r3_tree_insert_path(n, "/garply/grault/foo",  NULL);
r3_tree_insert_path(n, "/garply/grault/bar",  NULL);
r3_tree_insert_path(n, "/user/{id}",  NULL);
r3_tree_insert_path(n, "/post/{title:\\w+}",  NULL);

char *errstr = NULL;
int err;
err = r3_tree_compile(n, &errstr);
if (err != 0) {
    // fail
    printf("error: %s\n", errstr);
    free(errstr); // errstr is created from `asprintf`, so you have to free it manually.
}

r3_tree_render_file(n, "png", "check_gvc.png");
r3_tree_free(n);

Imgur

Or you can even export it with dot format:

digraph g {
	graph [bb="0,0,205.1,471"];
	node [label="\N"];
	"{root}"	 [height=0.5,
		pos="35.097,453",
		width=0.97491];
	"#1"	 [height=0.5,
		pos="35.097,366",
		width=0.75];
        ....

Graphviz Related Functions

int r3_tree_render_file(const node * tree, const char * format, const char * filename);

int r3_tree_render(const node * tree, const char *layout, const char * format, FILE *fp);

int r3_tree_render_dot(const node * tree, const char *layout, FILE *fp);

int r3_tree_render_file(const node * tree, const char * format, const char * filename);

JSON Output

You can render the whole tree structure into json format output.

Please run configure with the --enable-json option.

Here is the sample code to generate JSON string:

json_object * obj = r3_node_to_json_object(n);

const char *json = r3_node_to_json_pretty_string(n);
printf("Pretty JSON: %s\n",json);

const char *json = r3_node_to_json_string(n);
printf("JSON: %s\n",json);

Use case in PHP

not implemented yet

// Here is the paths data structure
$paths = [
    '/blog/post/{id}' => [ 'controller' => 'PostController' , 'action' => 'item'   , 'method'   => 'GET' ] , 
    '/blog/post'      => [ 'controller' => 'PostController' , 'action' => 'list'   , 'method'   => 'GET' ] , 
    '/blog/post'      => [ 'controller' => 'PostController' , 'action' => 'create' , 'method' => 'POST' ]  , 
    '/blog'           => [ 'controller' => 'BlogController' , 'action' => 'list'   , 'method'   => 'GET' ] , 
];
$rs = r3_compile($paths, 'persisten-table-id');
$ret = r3_dispatch($rs, '/blog/post/3' );
list($complete, $route, $variables) = $ret;

// matched conditions aren't done yet
list($error, $message) = r3_validate($route); // validate route conditions
if ( $error ) {
    echo $message; // "Method not allowed", "...";
}

Install

sudo apt-get install check libpcre3 libpcre3-dev libjemalloc-dev libjemalloc1 build-essential libtool automake autoconf pkg-config
sudo apt-get install graphviz-dev graphviz  # if you want graphviz
./autogen.sh
./configure && make
sudo make install

And we support debian-based distro now!

sudo apt-get install build-essential autoconf automake libpcre3-dev pkg-config debhelper libtool check
mv dist-debian debian
dpkg-buildpackage -b -us -uc
sudo gdebi ../libr3*.deb

Run Unit Tests

./configure --enable-check
make check

Enable Graphviz

./configure --enable-graphviz

With jemalloc

./configure --with-malloc=jemalloc

ubuntu PPA

The PPA for libr3 can be found in https://launchpad.net/~r3-team/+archive/libr3-daily.

Binding For Other Languages

License

This software is released under MIT License.