a norns mod to sequence psets
pset_seq is a simple mod that lets you sequence script psets.
- norns
you can install pset_seq and then activate the mod in SYSTEM > MODS > PSET_SEQ. after activating for the first time you need to restart SYSTEM > RESTART.
after installation you can activate the sequencer by going to PARAMETERS > EDIT > PSET_SEQUENCER.
In the PSET_SEQUENCER sub-menu you'll find the following parameters to control the sequencer:
mod midi port: sets the midi port (set in SYSTEMS>DEVICES>MIDI) of the device that can be used to send program changes to load a new psetmod midi in: sets the name device assigned to the selectedmod midi portthat can be used to send program changes to load a new psetpset seq enabled: turns the sequencer on and offpset seq mode: there are four modes:loop: loads the psets in order returning to the first pset after the last one has loadedup/down: loads the psets in order, with the load order reversed after the last pset or first pset has been loaded.random: randomly loads the psetsload pset: manually loads a pset (note:this works whether or not the sequencer has been enabled)
pset seq beatsandpset seq beats per bar: the combination of these two parameters sets the frequency in which a new pset gets loaded. the formula is:clock tempo* (pset seq beats/pset seq beats per bar)
firstandlast: the first and last psets to be used by the pset sequencer may be set with these two parameters<<reset first/last range>>: resets the first and last parameters (this is used to refresh the parameters if a new pset has been added to the script)
TODO
- enable
pset exclusion sets: this will allow parameters to be excluded from the pset sequencer so they may be adjusted while the pset sequencer is running. - replace metro with lattice
;install https://github.com/jaseknighter/pset_seq