GrandK/megapirateng

Issues

• i coded megapirate 2560 with megapirateNG 2.8 r3.i connected with mission planner everything is working properly.But if i connect battery esc will start beep not able to arm

  #71 opened 9 years ago
  0

• Camera Gimbal on MegaPirateNG 3.0.1 not working

  #70 opened 9 years ago
  1

• APM_HAL

  #69 opened 9 years ago
  10

• Sonar at Mission Planner CLI works but not appearing in flight data

  #68 opened 9 years ago
  1

• Camer trigger functionality not working in airplane mode (Cruis aiop board)

  #67 opened 9 years ago
  0

• ArduPlaneNG on Crius AIO Pro v.2

  #66 opened 9 years ago
  2

• Greatly appreciate for all the good work the MegaPirateNG team has contributed

  #65 opened 9 years ago
  1

• px4flow sensor port/support

  #64 opened 9 years ago
  2

• Are you there Alex?

  #63 opened 9 years ago
  3

• How do i clone the repository?

  #62 opened 9 years ago
  2

• Sonar Readings wrong

  #61 opened 9 years ago
  3

• Joystick Control doesn´t work

  #60 opened 9 years ago
  1

• loiter problems since using 4s LiPo's

  #59 opened 9 years ago
  3

• Unable to connect MP to Megapirate via 3DR radios.

  #58 opened 9 years ago
  7

• THANK YOU !!!!

  #57 opened 9 years ago
  1

• Elevator/Pitch Channel non responsive when loaded on HK Multiwii & Megapirate AIO board

  #56 opened 9 years ago
  0

• GPS shows location in multiwii and megapirate but aircraft wont function.

  #55 opened 9 years ago
  0

• Supports different types of models

  #54 opened 9 years ago
  0

• Accelerometer Calibration r303

  #53 opened 9 years ago
  11

• THR_Max does not work.

  #52 opened 9 years ago
  0

• [patch] GPS, Baro:add constructor initialization list

  #51 opened 9 years ago
  0

• [patch] LeadFilter: remove circular #include

  #50 opened 9 years ago
  2

• [patch] I2C, RangeFinder add constructor initialization list

  #49 opened 9 years ago
  1

• [patch] Compass: remove circular #include

  #48 opened 9 years ago
  2

• [patch] DataFlash: remove circular #include, add constructor initialization list

  #47 opened 9 years ago
  1

• Alt Hold in Megapirate V2.9 r300 keeps climbing

  #46 opened 9 years ago
  21

• Motors Disarm shortly after Arm / Takeoff in r299

  #45 opened 9 years ago
  5

• trimming changes after yaw

  #44 opened 9 years ago
  1

• Channel 6 pid tuning stopped working in 2.9 rev289

  #43 opened 9 years ago
  5

• Please include OptFlow Sensor code in MPNG /beta

  #42 opened 9 years ago
  2

• Unable to build MPNG from /beta on Linux using make

  #41 opened 9 years ago
  11

• 2.9R6 Arming problem with 3DR radio

  #40 opened 9 years ago
  3

• Gimbal outputs don't work

  #39 opened 9 years ago
  2

• Disarming when flying in stab mode!

  #38 opened 9 years ago
  143

• PPM Error Meesage

  #37 opened 9 years ago
  3

• Improving FRSKY Telemetry (Open9x - firmware) with MegapirateNG

  #36 opened 9 years ago
  2

• Sonar stop working after upgrade to MegaPirateNG V2.9 R6

  #35 opened 9 years ago
  1

• Loiter Issues update

  #34 opened 9 years ago
  1

• FRSKY PPM channel 1 reseting to center.

  #33 opened 9 years ago
  2

• 2.9 R5 BMP085 negative alt on FREEIMU.

  #32 opened 9 years ago
  0

• Camera Gimbal Jittery while Craft on ground with 2.9 rev5

  #31 opened 9 years ago
  2

• Crius AIO Tri Copter yaw servo not work MegaPirateNG

  #30 opened 9 years ago
  11

• LOITER

  #29 opened 9 years ago
  0

• Gimbal servo twitch

  #28 opened 9 years ago
  6

• controls freezed

  #27 opened 9 years ago
  2

• Fail with acc calibration

  #26 opened 9 years ago
  5

• Tri Copter yaw servo does not work MegaPirateNG_2.8_R3

  #25 opened 9 years ago
  5

• mpNG 2.9 rev 173 -could not build using Arduino 1.03

  #24 opened 9 years ago
  4

• increased the throttle by itselfs and flip over

  #23 opened 9 years ago
  5

• cam stabilisation doesn´t work

  #22 opened 9 years ago
  3