The Ansible H3C OPEN comware collection includes a variety of Ansible content to help automate the management of H3C comware network appliances.
This collection has been tested against H3C Networks comware OS V7.
This collection has been tested against following Ansible versions: >=2.14.0.
For collections that support Ansible 2.9, please ensure you update your network_os to use the
fully qualified collection name (for example, h3c_open.comware.comware).
Plugins and modules within a collection may be tested with only specific Ansible versions.
A collection may contain metadata that identifies these versions.
PEP440 is the schema used to describe the versions of Ansible.
The H3C OPEN comware collection supports network_cli and netconf connections.
| Name | Description |
|---|---|
| h3c_open.comware.comware | Use comware cliconf to run command on H3C comware OS platform |
| Name | Description |
|---|---|
| h3c_open.comware.comware | Use comware netconf plugin to run netconf commands on H3C comware platform |
| Name | Description |
|---|---|
| h3c_open.comware.comware_snmp_group | Manages SNMP group configuration on H3C switches. |
| h3c_open.comware.comware_igmp | Configure the igmp issue to be applied to the interface. |
| h3c_open.comware.comware_snmp_target_host | Manages SNMP user configuration on H3c switches. |
| h3c_open.comware.comware_bgp_group | create and config bgp group |
| h3c_open.comware.comware_ping | Ping remote destinations from the Comware 7 switch |
| h3c_open.comware.comware_isis_interface | Manage isis for Comware 7 devices |
| h3c_open.comware.comware_bgp_global | config bgp configs in the bgp instance view such as routerid |
| h3c_open.comware.comware_startup | config the next restart file or ipe . patch function not available,please use patch module |
| h3c_open.comware.comware_intfstate | Check the port status. If there are undo shutdown ports but the field ports are down, list these inconsistent ports. If not, return OK. |
| h3c_open.comware.comware_rollback | Rollback the running configuration |
| h3c_open.comware.comware_ntp | Configure the ntp issue to be applied to the device. |
| h3c_open.comware.comware_vsi_intf | Configure some functions of vsi-interface |
| h3c_open.comware.comware_dldp | Manage dldp authentication,interface,timeout and mode on Comware 7 devices. |
| h3c_open.comware.comware_loghost | Manage info-center log host and related parameters on V7 devices |
| h3c_open.comware.comware_telemetryflowtrace | Manage Package information of the message sent to the collector on V7 devices |
| h3c_open.comware.comware_irf_ports | Manage IRF port creation and removal for Comware v7 devices |
| h3c_open.comware.comware_facts | Gather facts of Comware 7 devices |
| h3c_open.comware.comware_config | Back uo current configuration to the specified file |
| h3c_open.comware.comware_teleflowgroup_global | Manage telemetry flow group agingtime on Comware 7 devices.The default value is Varies by device. |
| h3c_open.comware.comware_command | Execute CLI commands on Comware 7 devices |
| h3c_open.comware.comware_file_copy | Copy a local file to a remote Comware v7 device |
| h3c_open.comware.comware_vrrp_global | Manage VRRP global configuration mode |
| h3c_open.comware.comware_netstream | Manage ip netstream,rate,timeout, max_entry,vxlan udp-port,and interface enable and ip netstream aggregation destination-prefix enable, netstream statistics output message destination address and destination UDP port number configurationon Comware 7 devices |
| h3c_open.comware.comware_lacp | Manage lacp system priority, system mac on Comware 7 devices |
| h3c_open.comware.comware_patch | Manage patch |
| h3c_open.comware.comware_log_source | Manage output rules for log information on V7 devices |
| h3c_open.comware.comware_clean_erase | Factory default Comware 7 device |
| h3c_open.comware.comware_irf_members | Manage IRF membership configuration |
| h3c_open.comware.comware_isis_global | Manage isis for Comware 7 devices |
| h3c_open.comware.comware_bgp_af | Manage address family configs |
| h3c_open.comware.comware_license | loading device license |
| h3c_open.comware.comware_save | Save the running configuration |
| h3c_open.comware.comware_sflow | Manage sflow attributes for Comware 7 devices |
| h3c_open.comware.comware_stp | Manage stp global BPDU enable, working mode and tc-bpdu attack protection function. |
| h3c_open.comware.comware_reboot | Perform a reboot of a Comware 7 device |
| h3c_open.comware.comware_snmp_user | Manages SNMP user configuration on H3c switches. |
| h3c_open.comware.comware_ospf_intf | Manage ospf in interface |
| h3c_open.comware.comware_log | get the device diagnostic information and upload to file server |
| h3c_open.comware.comware_neighbors | Retrieve active LLDP neighbors (read-only) |
| h3c_open.comware.comware_ftp | Configure device FTP function. |
| h3c_open.comware.comware_tele_stream | Manage telemetry global enable(disable) and telemetry stream timestamp enable(disable) and device-id on Comware 7 devices.Before config device-id,the timestamp must be enable. |
| h3c_open.comware.comware_install_config | Activate a new current-running config in realtime |
| h3c_open.comware.comware_bfd | Management configuration bfd function |
| h3c_open.comware.comware_lldp_global | Manage global config state for LLDP.this funtion can be take effect only global and interface LLDP all open. The interface LLDP is open default. |
| h3c_open.comware.comware_vrrp | Manage VRRP configurations on a Comware v7 device |
| h3c_open.comware.comware_ospf | Manage ospf |
| h3c_open.comware.comware_netconf | Manage netconf log and xml function on Comware 7 devices.XML cfg not support enter xml view now,This is not normally done. |
| h3c_open.comware.comware_lldp | Manage lacp fast-Interval, tx-interval,hold-multplier on Comware 7 devices |
| h3c_open.comware.comware_vpn_instance | config instance rely ensure some instance configs can be set |
| h3c_open.comware.comware_install_os | Copy (if necessary) and install a new operating system on Comware v7 device |
| h3c_open.comware.comware_evpn | Configure the EVPN issue to be applied to the device. |
| h3c_open.comware.comware_mtu | Manage mtu and jumboframe of the interface |
| h3c_open.comware.comware_vxlan | Manage VXLAN to VSI mappings and Tunnel mappings to VXLAN |
| h3c_open.comware.comware_ipinterface | Manage IPv4/IPv6 addresses on interfaces |
| h3c_open.comware.comware_acl | Configure the acl issue to be applied to the interface. |
| h3c_open.comware.comware_iface_stp | Manage stp config in interface |
| h3c_open.comware.comware_syslog_global | Manage system log timestamps and terminal logging level on Comware 7 devices |
| h3c_open.comware.comware_switchport | Manage Layer 2 parameters on switchport interfaces |
| h3c_open.comware.comware_l2vpn_global | Manage global config state for L2VPN |
| h3c_open.comware.comware_hwtacacs | Manage hwtacacs scheme |
| h3c_open.comware.comware_snmp_community | Manages SNMP community configuration on H3C switches. |
| h3c_open.comware.comware_local_user | Manage local_user |
| h3c_open.comware.comware_vxlan_tunnel | Manage VXLAN tunnels on Comware 7 devices |
| h3c_open.comware.comware_radius | create radius scheme |
| h3c_open.comware.comware_aaa | This module provides AAA related management configuration and applications |
| h3c_open.comware.comware_compare | Enter the configuration command and compare it with the expected result. |
| h3c_open.comware.comware_vsi | Configure some command functions of vsi view |
| h3c_open.comware.comware_vlan | Manage VLAN attributes for Comware 7 devices |
| h3c_open.comware.comware_sflow_intf | Manage sflow interface flow collector and sampling_rate on Comware 7 devices. |
| h3c_open.comware.comware_vxlan_svc_instance | Manage mapping of an Ethernet Service to a VSI (VXLAN ID) |
| h3c_open.comware.comware_portchannel | Manage port-channel (LAG) on Comware 7 devices |
| h3c_open.comware.comware_interface | Manage administrative state and physical attributes of the interface |
| h3c_open.comware.comware_lldp_interface | Manage lldp enable on interfaces.The default state is enable. |
Click the Content button to see the list of content included in this collection.
You can install the H3C Networks comware collection with the Ansible Galaxy CLI:
ansible-galaxy collection install h3c_open.comware
You can also include it in a requirements.yml file and install it with ansible-galaxy collection install -r requirements.yml, using the format:
---
collections:
- name: h3c_open.comwareYou can call modules by their Fully Qualified Collection Namespace (FQCN), such as h3c_open.comware.comware_l2_interfaces.
The following example task replaces configuration changes in the existing configuration on a H3C Networks comware network device, using the FQCN:
---
- name: Basic Ethernet config
h3c_open.comware.comware_interface:
name: FortyGigE1/0/5
admin: up
description: mydesc
duplex: auto
speed: 40000 - H3C comware Platform options.
- Ansible Using collections for more details.
We welcome community contributions to this collection. If you find problems, please open an issue or create a PR against the H3C Networks comware collection repository. See Contributing to Ansible-maintained collections for complete details.
You can also join us on:
- IRC - the
#ansible-networkirc.libera.chat channel - Slack - https://ansiblenetwork.slack.com
See the Ansible Community Guide for details on contributing to Ansible.
This collection follows the Ansible project's Code of Conduct. Please read and familiarize yourself with this document.
Release notes are available here.
- Ansible network resources
- Ansible Collection overview
- Ansible User guide
- Ansible Developer guide
- Ansible Community code of conduct
GNU General Public License v3.0 or later.
See LICENSE to see the full text.