TraktForVLC allows scrobbling VLC content to [trakt.tv] 1. Since there is no way for VLC to directly know if you are watching a TV show or a Movie, this script will attempt to figure it out using the name of the video and its length. It is therefore possible that the script can't find what you're watching if your files are not named properly.
The TraktForVLC script is originally based off of [TraktForBoxee] 2 and works very similarly to it.
This version of the script is forked from [Wifsimster's TraktForVLC] 3, itself based on the original [quietcore's TraktForVLC] 4.
Copyright (C) 2012 Chris Maclellan <chrismaclellan@gmail.com>
Copyright (C) 2013 Damien Battistella <wifsimster@gmail.com>
Copyright (C) 2014-2015 Raphaël Beamonte <raphael.beamonte@gmail.com>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. [See the GNU General Public License for more details] GPLv2.
As I'm a fervent [Linux] 5 user, this version of the script has only been used and tested on Linux [Debian] 6. I will not be able to maintain directly the [Windows] 7 compatibility but I'm open to pull requests on this side, as we're here to share.
This version of TraktForVLC has been tested using Python 2.7.9 and Python 3.4.2 It should however be compatible with the following versions:
- Python 2.6
- Python 2.7
- Python 3.3
- Python 3.4
This version of TraktForVLC has been tested using VLC 2.2.0 Weatherwax
To get the sources, you only need to clone the repository using the following command on Linux:
git clone https://github.com/XaF/TraktForVLC.gitOn [Windows] 7, you can download the [last version of the ZIP package] 8.
Go to:
- Tools
- then Preferences
In the preferences window that just opened, look at the bottom left and check All.
Then, in the menu that appeared in place of the icons on the left, go to:
- Interface
- Main interfaces
Here, in the list of Extra interface modules, check Remote control interface.
WARNING in some versions of VLC, when checking Remote control interface, you will see oldrc appearing in the lines below. If it is the case, please edit manually that line to read rc instead. TraktForVLC can use oldrc, but the behavior of rc is much more predictable thus preferable.
Then, go to:
- RC (submenu of Main interfaces)
And in the line TCP command input insert localhost:4222 (you can adjust the host and port if you want, but you'll have to keep it in mind for the next steps).
On [Windows] 7, you will also find a checkbox Do not open a DOS command box interface that you should check if you don't want to see a console each time you start VLC.
Instead of configuring VLC, you can use parameters in your VLC
command line to start the remote control server. The following line
can be use either way on [Linux] 5 or [Windows] 7 by adjusting
the vlc at start by the path to your VLC executable (usually
vlc.exe on Windows).
vlc --extraintf=rc --rc-host=localhost:4222On [Windows] 7, you can also add the --rc-quiet option
to disable the console.
The windows_batch/ directory of this repository contains different
batch files. The file set_registry_keys.bat should allow to
automatically configure your system to open some multimedia files with
VLC and with the right options.
The config.bat file allows to configure which multimedia files are
concerned, and other options needed before running the set_registry_keys.bat:
:::: Configuration to set the registry keys
:: Set the full path to the VLC exe file on your computer
set vlc_path=C:\your\path\to\VideoLAN\VLC\vlc.exe
:: Set the IP address VLC will listen to (default: localhost)
set ip=localhost
:: Set the port VLC will listen to (default: 4222)
set port=4222
:: Set the file formats for which you want VLC to be start
:: listening to remote control for TraktForVLC to work. You
:: can add as much format as you want, all format must be
:: separated by a coma.
set formats=avi, mkv, mov, mp4, wmv, ts, mpgConfigure those options carefully, then run (double-click for instance) the
set_registry_keys.bat file. VLC should then be ready, you can now
configure TraktForVLC.
TraktForVLC needs its config.ini file to work properly. The content
of the file is as follow:
[VLC]
IP = localhost # The host of the VLC Remote Control server
Port = 4222 # The port of the VLC Remote Control serverThis is the general server configuration. You should put here the same information you used in your configuration of VLC to allow TraktForVLC to connect to your VLC instance.
[Trakt]
PIN = [pin code] # Identify yourself on the page https://trakt.tv/pin/2498
# and put here the resulting pin codeThis is a [trakt.tv pin you can get from this web page] pin. After
the first [trakt.tv] 1 connection, this PIN entry will be replaced
automatically by two new entries: access_token and refresh_token.
Be careful not to remove those entries from your configuration, or you will
need to put back a PIN entry with [a new freshly generated pin code from
trakt.tv] pin.
[TraktForVLC]
Timer = 60 # Time (sec) between each loop and look of TraktForVLC
StartWatching = 30 # Time (sec) before considering a video is currently watched
UseFilenames = No # Whether or not to use filenames instead of VLC window title
ScrobblePercent = 90 # Percentage (%) of the video to be spent before scrobbling it
ScrobbleMovie = Yes # Whether or not TraktForVLC will automatically scrobble movies
ScrobbleTV = Yes # Whether or not TraktForVLC will automatically scrobble tv shows
WatchingMovie = Yes # Whether or not movies will be marked as being watched
WatchingTV = Yes # Whether or not tv shows will be marked as being watchedThis is the script-specific configuration, the time between each loop of work, the time before considering you're effectively watching a video, and whether or not scrobble automatically what you're watching on [trakt.tv] 1.
This script needs to be kept alive, and to be working when you start watching something. Achieving this need is very different if you're on [Linux] 5 or [Windows] 7. This part aims to guide you to do these steps.
There is different way to realize what we want to do on Linux. I'll just give here two different and simple ways as reference.
Go to your Startup Applications Preferences, then click on the Add button. Here, you can give the name you want to your task, and you only need to add the following line in the Command box:
path/to/your/TraktForVLC.py --daemonYour task will then automatically be started with your session.
If you want to start Trakt automatically with your session but don't want to use
Gnome's Startup Applications Preferences, you can add the line proposed below
directly in your .bash_profile script.
A start_process.bat file is joined to the source files of TraktForVLC. You need to
edit it to reflect the data and configuration directory of your TraktForVLC
installation, then you can add this program as a scheduled task that starts when you
open your session.
Save the following file as org.TraktForVLC.plist in your ~/Library/LaunchAgents/
folder (you can copy and edit the file from the macosx directory of this repository):
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN"
"http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>org.user.TraktForVLC</string>
<key>ProgramArguments</key>
<array>
<string>[EDIT: /usr/bin/python]</string>
<string>[EDIT: /path/to/TraktForVLC/TraktForVLC.py]</string>
</array>
<key>WorkingDirectory</key>
<string>[EDIT: /path/to/TraktForVLC]</string>
<key>RunAtLoad</key>
<true />
<key>LaunchOnlyOnce</key>
<true />
<key>KeepAlive</key>
<true />
</dict>
</plist>And edit the [EDIT: ...] blocks to reflect your installation.
You can then load the file using the following command:
launchctl load ~/Library/LaunchAgents/org.TraktForVLC.plistTraktForVLC should be started as soon as you enter that last command,
and will automatically be started for subsequent system boots.
Please use the [GitHub integrated issue tracker] 9 for every problem you can encounter. Please DO NOT use my email for issues or walkthrough.
When submitting an issue, please submit a TraktForVLC logfile showing the error.
You can start TraktForVLC in debug mode (--debug option) to obtain more
thorough logs and with small timers (--small-timers option) to speed up its
internal loop. The resulting logfile (TraktForVLC-DEBUG.log) should then be
available in your logs/ directory.
Please be careful to remove any personnal information that could still be in the logfile (password, identification token, ...) before putting your file online.