/HAD_CLOCK_191211

Clock for HAD Contest

Primary LanguageC

HAD_CLOCK_191211

Clock for HAD Contest

TODO

  • Final verification of footprints. Last time!
  • Sort out transformer
  • Design an enclosure
  • Add buttons to program the time (Research cap touch)
  • Convert Mouser Project into csv

Microcontroller Corrections to PIC18F45K20

Consider making a version for the LPC804 as well as the PIC

Consider making multiple sheets for the schematic

Redo the outline in 4 x 15 pattern instead of a 3 x 20 pattern

Parts to Select

  • Transformer
  • Diodes
  • Resist0r 0603 100 ohm for 20 mAs at 3v3. 72 resistors

Shift Register (Affects resistor size)

Full rectifier

Brief License

  • Non-comericial
  • Unlimited remakes for personal use
  • Cite this project as source for any re-mixes

Online Resources

https://www.pcbway.com/pcb_prototype/What_are_Plated_Half_Holes_Castellated_Holes_.html

KiCAD Renders

Front Back
![Clock Front] (https://github.com/HappyNapalm/HAD_CLOCK_191211/blob/pic18/front.png) ![Clock Rear] (https://github.com/HappyNapalm/HAD_CLOCK_191211/blob/pic18/rear.png)

![LED Test Front] (../renders/01_LED_test/front.png)

![LED Test Rear] (../renders/01_LED_test/rear.png)