/RTCSetup

Steps to setup RTC servers (signalling, STUN and TURN)

Primary LanguageJavaScript

RTCSetup

Steps to setup RTC servers (signalling, STUN, TURN and Media servers)

Basic steps to setup coturn as TURN server:

  1. Install Dependencies
sudo apt-get install libssl-dev libevent-dev libhiredis-dev make -y
  1. Download TURN server package
wget http://turnserver.open-sys.org/downloads/v4.5.0.6/turnserver-4.5.0.6.tar.gz
  1. Install turn server
$ tar xvfz turnserver-2.6.5.2.tar.gz
$ cd turnserver-2.6.5.2
$ ./configure
$ make
$ sudo make install
$ ldconfig
  1. Create TURN user and password
sudo turnadmin -a -u happy -p happy

  1. Open all relevent ports

  2. Running TURN server:

sudo turnserver -L <listening-ip> -a -f

For AWS (or write params in config file):

sudo turnserver –syslog -a -L ‘amazon ec2 PRIVATE ip address’ -X ‘amazon ec2 PUBLIC ip address’ -E ‘amazon ec2 PRIVATE ip address’ -f –min-port=32355 –max-port=65535 –user=’my_username’:’my_password’ -r realm –log-file=stdout -v

Turn Config file setup:

  1. Copy default config and edit all changes.
cp /usr/local/etc/turnserver.conf.default /usr/local/etc/turnserver.conf

Uncomment no-stun in config file for turn only server.