- In a team of 3, to showcase how an automatic door works on an Arduino using PIR Sensors and other various components
You need the following Hardware:
- 1x Arduino Uno
- 1x PIR Sensor
- 1x LED
- 1x Slide Switch
- 1x Servo Motor
- 1x Bluetooth HC-05 (master and slave)
- 1x Cardboard Box or Wooden Box
- 2x 1k Resistors
- 1x Potentiometer
- 1x Breadboard
- My role in this project was to code on both Arduino IDE and Android APP.
- My two other partner did the hardware, setup on the box, and troubleshooting