/WLED

Control WS2812B RGB LEDs with an ESP8266 over WiFi!

Primary LanguageC++MIT LicenseMIT

Sound Reactive WLED! 🎵

Welcome to our Sound Reactive fork of WLED. In addition to the features of WLED below, we also support:

  • Audio input from several sources including MAX4466, MAX9814, MAX9184, INMP401, INMP441 (for ESP32) and line-in.
  • Volume reactive visual effects for ESP32 and ESP8266 devices.
  • Frequency reactive visual effects for ESP32 devices.
  • UDP sound synchronization with transmit for ESP32 and receive for ESP8266 and ESP32 devices.
  • 2D visual effects for ESP32 devices.
  • Squelch and gain settings for ESP8266 and ESP32 devices for the volume reactive visual effects.
  • 2D settings for ESP32 devices.
  • Frequency reactive sliders for ESP32 devices.

We currently have 3 active forks for our Sound Reactive WLED. They are:

In addition, we have a Sound Reactive WLED Wiki.

Join Discord to discuss beta testing of our sound reactive fork of WLED:

Join Discord to discuss AirCookie's WLED:

And now onto regular WLED . . .

Welcome to my project WLED!

A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control NeoPixel (WS2812B, WS2811, SK6812) LEDs or also SPI based chipsets like the WS2801 and APA102!

⚙️ Features

  • WS2812FX library integrated for over 100 special effects
  • FastLED noise effects and 50 palettes
  • Modern UI with color, effect and segment controls
  • Segments to set different effects and colors to parts of the LEDs
  • Settings page - configuration over network
  • Access Point and station mode - automatic failsafe AP
  • Up to 10 LED outputs per instance
  • Support for RGBW strips
  • Up to 250 user presets to save and load colors/effects easily, supports cycling through them.
  • Presets can be used to automatically execute API calls
  • Nightlight function (gradually dims down)
  • Full OTA software updatability (HTTP + ArduinoOTA), password protectable
  • Configurable analog clock + support for the Cronixie kit by Diamex
  • Configurable Auto Brightness limit for safer operation
  • Filesystem-based config for easier backup of presets and settings

💡 Supported light control interfaces

  • WLED app for Android and iOS
  • JSON and HTTP request APIs
  • MQTT
  • Blynk IoT
  • E1.31, Art-Net, DDP and TPM2.net
  • diyHue (Wled is supported by diyHue, including Hue Sync Entertainment under udp. Thanks to Gregory Mallios)
  • Hyperion
  • UDP realtime
  • Alexa voice control (including dimming and color)
  • Sync to Philips hue lights
  • Adalight (PC ambilight via serial) and TPM2
  • Sync color of multiple WLED devices (UDP notifier)
  • Infrared remotes (24-key RGB, receiver required)
  • Simple timers/schedules (time from NTP, timezones/DST supported)

📲 Quick start guide and documentation

See the wiki!

On this page you can find excellent tutorials made by the community and helpful tools to help you get your new lamp up and running!

🖼️ Images

💾 Compatible LED Strips

Type Voltage Comments
WS2812B 5v
WS2813 5v
SK6812 5v RGBW
APA102 5v C/D
WS2801 5v C/D
LPD8806 5v C/D
TM1814 12v RGBW
WS2811 12v 3-LED segments
WS2815 12v
GS8208 12v
Analog/non-addressable any Requires additional circuitry

🧊 Compatible PC RGB Fans and ARGB accessories

Brand Model Comments
Corsair HD120 Fan Uses WS2812B, data-in only
PCCOOLER Moonlight 5-pack Fans Uses WS2812B, includes Data-out connector to keep each fan uniquely addressable if wired in series like traditional LED strips
Any 5v 3-pin ARGB for PC Any PC RGB device that supports the 5v 3-pin ARGB motherboard header should work fine with WLED. All the major motherboard vendors support the Corsair HD120 and PCCOOLER fans listed, so we can safely assume any device that supports motherboard ARGB 5V 3-Pin standard will work with WLED.

✌️ Other

Licensed under the MIT license Credits here!

Uses Linearicons by Perxis!

Join the Discord server to discuss everything about WLED!

Check out the WLED Discourse forum! You can also send me mails to dev.aircoookie@gmail.com, but please only do so if you want to talk to me privately. If WLED really brightens up your every day, you can

Disclaimer: If you are sensitive to photosensitive epilepsy it is not recommended that you use this software. In case you still want to try, don't use strobe, lighting or noise modes or high effect speed settings. As per the MIT license, I assume no liability for any damage to you or any other person or equipment.