Custom component to support Easee EV chargers.
The status sensor is the default sensor and has the following values
STANDBY
PAUSED
CHARGING
READY_TO_CHARGE
CAR_CONNECTED
Important This component quite new and uses the (easee library)[https://github.com/fondberg/easee]. Please help me test and preferbly suggest the fixes as a PR or technical note in an issue.
There are 2 different methods of installing the custom component
While this component can be installed by HACS, it is not included in the default repository of HACS.
- Add this repository as a custom repository inside HACS settings. Make sure you select
Integration
as Category. - Install the component from the Overview page.
- Make sure you have git installed on your machine.
- Navigate to you home assistant configuration folder.
- Create a
custom_components
folder of it does not exist, navigate down into it after creation. - Execute the following command:
git clone https://github.com/fondberg/easee_hass.git easee
- Run
bash links.sh
Add the following to your configuration and restart Home Assistant.
easee:
Configuration is done through in Configuration > Integrations where you first configure it and then set the options for what you want to monitor.
This project uses black
for code formatting and flake8
for linting. Two errors should be ignored when running flake8 so run it with
flake8 --ignore=E501,E231 custom_components/