HexNanoMWC_QUAD

A modified MWC2.2 flight control for FlexBot quad board.

And the project is one part of the FlexBot Project.

##Source Code

You can either download the source using the "Download ZIP" button at the bottom left of the github page, or you can make a clone using git:

git clone https://github.com/HexAirbot/HexNanoMWC_QUAD.git

####Latest release

####How to compile

1.Download the Arduino IDE (you should use the version 1.0.5+)

2.Download the source code here, and put all the source files (.ino file) under folder HexNanoMWC_QUAD.

3.Open the main file HexNanoMWC_QUAD.ino with the Arduino IDE, and the IDE will also automatically open other source files.

4.Connect your Flexbot via USB

5.Set the Board in your IDE to Arduino Leonardo Select the correct COM Port

6.Click the verify and then the upload button

##Development The FlexBot Project is open source.

To contribute, you can send a pull request on Github, or share your idea to the forum.

##Support Website