Injector

Library for injecting a shared library into a Linux, Windows and MacOS process

Linux

Warning
Don't use this in production environments. It may stop target processes forever. See Caveats.

I was inspired by linux-inject and the basic idea came from it. However the way to call __libc_dlopen_mode in libc.so.6 is thoroughly different.

linux-inject writes about 80 bytes of code to the target process on x86_64. This writes only 4 ~ 16 bytes.
linux-inject writes code at the firstly found executable region of memory, which may be referred by other threads. This writes it at the entry point of libc.so.6, which will be referred by nobody unless the libc itself is executed as a program.

Windows

Windows version is also here. It uses well-known CreateRemoteThread+LoadLibrary technique to load a DLL into another process with some improvements.

It gets Win32 error messages when LoadLibrary fails by copying assembly code into the target process.
It can inject a 32-bit dll into a 32-bit process from x64 processes by checking the export entries in 32-bit kernel32.dll.

Note: It may work on Windows on ARM though I have not tested it because I have no ARM machines. Let me know if it really works.

MacOS

The injector connects to the target process using task_for_pid and creates a mach-thread. If dlopen is called in this thread, the target process will fail with an error, however, it is possible to create another thread using pthread_create_from_mach_thread function for Mac >= 10.12 or pthread_create otherwise. In the created thread, the code for loading the library is executed. The second thread is created when injector_inject is called and terminated when injector_detach is called.

Compilation

Linux

$ git clone https://github.com/kubo/injector.git
$ cd injector
$ make

The make command creates:

filename	-
`src/linux/libinjector.a`	a static library
`src/linux/libinjector.so`	a shared library
`cmd/injector`	a command line program linked with the static library

Windows (MSVC)

Open a Visual Studio command prompt and run the following commands:

$ git clone https://github.com/kubo/injector.git # Or use any other tool
$ cd injector
$ nmake -f Makefile.win32

The nmake command creates:

filename	-
`src/windows/injector-static.lib`	a static library (release build)
`src/windows/injector.dll`	a shared library (release build)
`src/windows/injector.lib`	an import library for `injector.dll`
`src/windows/injectord-static.lib`	a static library (debug build)
`src/windows/injectord.dll`	a shared library (debug build)
`src/windows/injectord.lib`	an import library for `injectord.dll`
`cmd/injector.exe`	a command line program linked the static library (release build)

Windows (mingw-w64)

On MSYS2:

$ git clone https://github.com/kubo/injector.git
$ cd injector
$ CC=gcc make

Cross-compilation on Linux:

$ git clone https://github.com/kubo/injector.git
$ cd injector
$ CC=x86_64-w64-mingw32-gcc OS=Windows_NT make

The environment variable OS=Windows_NT must be set on Linux.

MacOS

$ git clone https://github.com/TheOiseth/injector.git
$ cd injector
$ make

The make command creates:

filename	-
`src/macos/libinjector.a`	a static library
`src/macos/libinjector.dylib`	a shared library
`cmd/injector`	a command line program linked with the static library

Important: in order for the injector process to connect to another process using task_for_pid, it is necessary to disable SIP or sign the injector with a self-signed certificate with debugging permission, for this:

$ cd cmd/macos-sign
$ chmod +x genkey.sh
$ ./genkey.sh
$ chmod +x sign.sh
$ ./sign.sh

If injector still does not work after signing, reboot the system.

Usage

C API

#include <injector.h>

...

    injector_t *injector;
    void *handle;

    /* attach to a process whose process id is 1234. */
    if (injector_attach(&injector, 1234) != 0) {
        printf("ATTACH ERROR: %s\n", injector_error());
        return;
    }
    /* inject a shared library into the process. */
    if (injector_inject(injector, "/path/to/shared/library", NULL) != 0) {
        printf("INJECT ERROR: %s\n", injector_error());
    }
    /* inject another shared library. */
    if (injector_inject(injector, "/path/to/another/shared/library", &handle) != 0) {
        printf("INJECT ERROR: %s\n", injector_error());
    }

...

    /* uninject the second shared library. */
    if (injector_uninject(injector, handle) != 0) {
        printf("UNINJECT ERROR: %s\n", injector_error());
    }

    /* cleanup */
    injector_detach(injector);

Command line program

See Usage section and Sample section in linux-inject and substitute inject with injector in the page.

Tested Architectures

Linux

x86_64:

injector process \ target process	x86_64	i386	x32(*1)
x86_64	😃 success(*2)	😃 success(*3)	😃 success(*6)
i386	💀 failure(*4)	😃 success(*3)	💀 failure(*5)
x32(*1)	💀 failure(*4)	😃 success(*6)	💀 failure(*5)

*1: x32 ABI
*2: tested on github actions with both glibc and musl.
*3: tested on github actions with glibc.
*4: failure with 64-bit target process isn't supported by 32-bit process.
*5: failure with x32-ABI target process is supported only by x86_64.
*6: tested on a local machine. CONFIG_X86_X32 isn't enabled in github actions.

ARM:

injector process \ target process	arm64	armhf	armel
arm64	😃 success	😃 success	😃 success
armhf	💀 failure(*1)	😃 success	😃 success
armel	💀 failure(*1)	😃 success	😃 success

*1: failure with 64-bit target process isn't supported by 32-bit process.

MIPS:

injector process \ target process	mips64el	mipsel (n32)	mipsel (o32)
mips64el	😃 success (*1)	😃 success (*1)	😃 success (*1)
mipsel (n32)	💀 failure(*2)	😃 success (*1)	😃 success (*1)
mipsel (o32)	💀 failure(*2)	😃 success (*1)	😃 success (*1)

*1: tested on debian 11 mips64el on QEMU.
*2: failure with 64-bit target process isn't supported by 32-bit process.

PowerPC:

ppc64le (tested on alpine 3.16.2 ppc64le on QEMU)
powerpc (big endian) (tested on ubuntu 16.04 powerpc on QEMU

RISC-V:

riscv64 (tested on Ubuntu 22.04.1 riscv64 on QEMU)

Windows

Windows x64:

injector process \ target process	x64	x86
x64	😃 success(*2)	😃 success(*2)
x86	💀 failure(*1)	😃 success(*2)

*1: failure with x64 target process isn't supported by x86 process.
*2: tested on github actions

Windows 11 on Arm:

injector process \ target process	arm64	arm64ec	x64	x86	arm32
arm64	😃 success	💀 failure	💀 failure	💀 failure	😃 success
arm64ec	💀 failure	😃 success	😃 success	💀 failure	💀 failure
x64	💀 failure	😃 success	😃 success	💀 failure	💀 failure
x86	💀 failure	💀 failure	💀 failure	😃 success	💀 failure
arm32	💀 failure	💀 failure	💀 failure	💀 failure	😃 success

Wine (on Linux x86_64):

injector process \ target process	x64	x86
x64	😃 success	💀 failure
x86	💀 failure	😃 success

MacOS

injector process \ target process	x64	arm64
x64	😃 success(*1)	💀 failure(*2)
arm64	💀 failure(*3)	😃 success

*1: failure with x86_64 target process isn't supported by x86_64 process on ARM64 machine. Tested on github actions.
*2: failure with arm64 target process isn't supported by x86_64 process.
*3: failure with x86_64 target process isn't supported by arm64 process.

Caveats

The following restrictions are only on Linux.

Injector doesn't work where ptrace() is disallowed.

Non-children processes (See Caveat about ptrace())
Docker containers on docker version < 19.03 or linux kernel version < 4.8. You need to pass --cap-add=SYS_PTRACE to docker run to allow it in the environments.
Linux inside of UserLAnd (Android App) (See here)

Injector calls functions inside of a target process interrupted by ptrace(). If the target process is interrupted while holding a non-reentrant lock and injector calls a function requiring the same lock, the process stops forever. If the lock type is reentrant, the status guarded by the lock may become inconsistent. As far as I checked, dlopen() internally calls malloc() requiring non-reentrant locks. dlopen() also uses a reentrant lock to guard information about loaded files.

On Linux x86_64 injector_inject_in_cloned_thread in place of injector_inject may be a solution of the locking issue. It calls dlopen() in a thread created by clone(). Note that no wonder there are unexpected pitfalls because some resources allocated in pthread_create() lack in the clone()-ed thread. Use it at your own risk.

License

Files under include and src are licensed under LGPL 2.1 or later.
Files under cmd are licensed under GPL 2 or later.
Files under util are licensed under 2-clause BSD.

Hhk78/injector

Injector

Linux

Windows

MacOS

Compilation

Linux

Windows (MSVC)

Windows (mingw-w64)

MacOS

Usage

C API

Command line program

Tested Architectures

Linux

Windows

MacOS

Caveats

License