/emsdk

Emscripten SDK

Primary LanguagePythonOtherNOASSERTION

Emscripten SDK

CircleCI

Emscripten toolchain is distributed as a standalone Emscripten SDK. The SDK provides all the required tools, such as Clang, Python and Node.js along with an update mechanism that enables migrating to newer Emscripten versions as they are released.

You can also set up Emscripten from source, without the pre-built SDK, see "Installing from Source" below.

Downloads

To get started with Emscripten development, see the Emscripten website documentation.

Old Releases are available in the Archived Releases section below.

SDK Concepts

The Emscripten SDK is effectively a small package manager for tools that are used in conjunction with Emscripten. The following glossary highlights the important concepts to help understanding the internals of the SDK:

  • Tool: The basic unit of software bundled in the SDK. A Tool has a name and a version. For example, 'clang-3.2-32bit' is a Tool that contains the 32-bit version of the Clang v3.2 compiler.
  • SDK: A set of tools. For example, 'sdk-1.5.6-32bit' is an SDK consisting of the tools clang-3.2-32bit, node-0.10.17-32bit, python-2.7.5.1-32bit and emscripten-1.5.6.
  • Active Tool/SDK: Emscripten stores compiler configuration in a user-specific file ~/.emscripten. This file points to paths for Emscripten, Python, Clang and so on. If the file ~/.emscripten is configured to point to a Tool in a specific directory, then that tool is denoted as being active. The Emscripten Command Prompt always gives access to the currently active Tools. This mechanism allows switching between different installed SDK versions easily.
  • emsdk: This is the name of the manager script that Emscripten SDK is accessed through. Most operations are of the form emsdk command. To access the emsdk script, launch the Emscripten Command Prompt.

SDK Maintenance

The following tasks are common with the Emscripten SDK:

How do I work the emsdk utility?

Run emsdk help or just emsdk to get information about all available commands.

How do I check the installation status and version of the SDK and tools?

To get a list of all currently installed tools and SDK versions, and all available tools, run emsdk list.

  • A line will be printed for each tool/SDK that is available for installation.
  • The text INSTALLED will be shown for each tool that has already been installed.
  • If a tool/SDK is currently active, a star * will be shown next to it.
  • If a tool/SDK is currently active, but the terminal your are calling emsdk from does not have PATH and environment set up to utilize that tool, a star in parentheses (*) will be shown next to it. Run emsdk_env.bat (Windows) or source ./emsdk_env.sh (Linux and OS X) to set up the environment for the calling terminal.
How do I install a tool/SDK version?

Run the command emsdk install <tool/sdk name> to download and install a new tool or an SDK version.

How do I remove a tool or an SDK?

Run the command emsdk uninstall <tool/sdk name> to delete the given tool or SDK from the local hard drive completely.

How do I check for updates to the Emscripten SDK?

The command emsdk update will fetch package information for all new tools and SDK versions. After that, run emsdk install <tool/sdk name> to install a new version. The command emsdk update-tags obtains a list of all new tagged releases from GitHub without updating Emscripten SDK itself.

How do I install an old Emscripten compiler version?

Emsdk contains a history of old compiler versions that you can use to maintain your migration path. Type emsdk list --old to get a list of archived tool and SDK versions, and emsdk install <name_of_tool> to install it.

On Windows, you can directly install an old SDK version by using one of the archived offline NSIS installers. See the Archived Releases section down below.

When working on git branches compiled from source, how do I update to a newer compiler version?

Unlike tags and precompiled versions, a few of the SDK packages are based on "moving" git branches and compiled from source (sdk-incoming, sdk-master, emscripten-incoming, emscripten-master, binaryen-master). Because of that, the compiled versions will eventually go out of date as new commits are introduced to the development branches. To update an old compiled installation of one of this branches, simply reissue the "emsdk install" command on that tool/SDK. This will git pull the latest changes to the branch and issue an incremental recompilation of the target in question. This way you can keep calling emsdk install to keep an Emscripten installation up to date with a given git branch.

Note though that if the previously compiled branch is very old, sometimes CMake gets confused and is unable to properly rebuild a project. This has happened in the past e.g. when LLVM migrated to requiring a newer CMake version. In cases of any odd compilation errors, it is advised to try deleting the intermediate build directory to clear the build (e.g. "emsdk/clang/fastcomp/build_xxx/") before reissuing emsdk install.

How do I change the currently active SDK version?

You can toggle between different tools and SDK versions by running emsdk activate <tool/sdk name>. Activating a tool will set up ~/.emscripten to point to that particular tool. On Windows, you can pass the option --global to the activate command to register the environment permanently to the system registry for all users.

How do I build multiple projects with different SDK versions in parallel?

By default, Emscripten locates all configuration files in the home directory of the user. This may be a problem if you need to simultaneously build with multiple Emscripten compiler versions, since the user home directory can only be configured to point to one compiler at a time. This can be overcome by specifying the '--embedded' option as a parameter to 'emsdk activate', which will signal emsdk to generate the compiler configuration files inside the emsdk root directory instead of the user home directory. Use this option also when it is desirable to run emsdk in a fully portable mode that does not touch any files outside the emsdk directory.

How do I track the latest Emscripten development with the SDK?

A common and supported use case of the Emscripten SDK is to enable the workflow where you directly interact with the github repositories. This allows you to obtain new features and latest fixes immediately as they are pushed to the github repository, without having to wait for release to be tagged. You do not need a github account or a fork of Emscripten to do this. To switch to using the latest upstream git development branch incoming, run the following:

emsdk install git-1.9.4 # Install git. Skip if the system already has it.
emsdk install sdk-incoming-64bit # Clone+pull the latest kripken/emscripten/incoming.
emsdk activate sdk-incoming-64bit # Set the incoming SDK as the currently active one.

If you want to use the upstream stable branch master, then replace -incoming- with -master- above.

How do I use my own Emscripten github fork with the SDK?

It is also possible to use your own fork of the Emscripten repository via the SDK. This is achieved with standard git machinery, so there if you are already acquainted with working on multiple remotes in a git clone, these steps should be familiar to you. This is useful in the case when you want to make your own modifications to the Emscripten toolchain, but still keep using the SDK environment and tools. To set up your own fork as the currently active Emscripten toolchain, first install the sdk-incoming SDK like shown in the previous section, and then run the following commands in the emsdk directory:

cd emscripten/incoming
# Add a git remote link to your own repository.
git remote add myremote https://github.com/mygituseraccount/emscripten.git
# Obtain the changes in your link.
git fetch myremote
# Switch the emscripten-incoming tool to use your fork.
git checkout -b myincoming --track myremote/incoming

In this way you can utilize the Emscripten SDK tools while using your own git fork. You can switch back and forth between remotes via the git checkout command as usual.

How do I use Emscripten SDK with a custom version of python, java, node.js or some other tool?

The provided Emscripten SDK targets are metapackages that refer to a specific set of tools that have been tested to work together. For example, sdk-1.35.0-64bit is an alias to the individual packages clang-e1.35.0-64bit, node-4.1.1-64bit, python-2.7.5.3-64bit and emscripten-1.35.0. This means that if you install this version of the SDK, both python and node.js will be installed inside emsdk as well. If you want to use your own/system python or node.js instead, you can opt to install emsdk by specifying the individual set of packages that you want to use. For example, emsdk install clang-e1.35.0-64bit emscripten-1.35.0 will only install the Emscripten LLVM/Clang compiler and the Emscripten frontend without supplying python and node.js.

My installation fails with "fatal error: ld terminated with signal 9 [Killed]"?

This may happen if the system runs out of memory. If you are attempting to build one of the packages from source and are running in a virtual OS or have relatively little RAM and disk space available, then the build might fail. Try feeding your computer more memory. Another thing to try is to force emsdk install to build in a singlethreaded mode, which will require less RAM simultaneously. To do this, pass the -j1 flag to the emsdk install command.

Uninstalling the Emscripten SDK

If you installed the SDK using an NSIS installer on Windows, launch 'Control Panel' -> 'Uninstall a program' -> 'Emscripten SDK'.

If you want to remove a Portable SDK, just delete the directory where you put the Portable SDK into.

Platform-Specific Notes

Mac OS X
  • On OS X (and Linux), the git tool will not be installed automatically. Git is not a required core component, and is only needed if you want to use one of the development branches emscripten-incoming or emscripten-master directly, instead of the fixed releases. To install git on OS X, you can

    1. Install XCode, and in XCode, install XCode Command Line Tools. This will provide git to the system PATH. For more help on this step, see http://stackoverflow.com/questions/9329243/xcode-4-4-command-line-tools
    2. Install git directly from http://git-scm.com/
  • Also, on OS X, java is not bundled with the Emscripten SDK. After installing emscripten via emsdk, typing 'emcc --help' should pop up a OS X dialog "Java is not installed. To open java, you need a Java SE 6 runtime. Would you like to install one now?" that will automatically download a Java runtime to the system.

Linux
  • On Linux, emsdk does not interact with Linux package managers on the behalf of the user, nor does it install any tools to the system. All file changes are done inside the emsdk/ directory.

  • Emsdk does not provide python, node or java on Linux. The user is expected to install these beforehand with the system package manager.

Windows
  • On Windows, if you want to build any of the packages from source (instead of using the precompiled ones), you will need git, CMake and Visual Studio 2015. Git can be installed via emsdk by typing "emsdk install git-1.9.4", CMake can be found from http://www.cmake.org/, and Visual Studio can be installed from https://www.visualstudio.com.
How do I run Emscripten on 32-bit Windows?

Emscripten SDK releases are no longer packaged or maintained for 32-bit Windows. If you want to run Emscripten on a 32-bit system, you can try manually building the compiler for 32-bit mode. Follow the steps in the above section "Building an Emscripten tag or branch from source" to get started.