HolyCityAudio/SpinCAD-Designer

Issues

• Create 1/X control block with ratio/threshold control

  #47 opened 9 months ago by Digital-Larry
  1

• Hall Reverb block requires pin connection on "HF Loss" - missing @isPinConnected

  #51 opened 9 months ago by Digital-Larry
  1

• Add width control input to Ramp LFO [enhancement]

  #46 opened 9 months ago by Digital-Larry
  1

• Crossfade 3 not working correctly.

  #50 opened 10 months ago by Digital-Larry
  2

• Using SKP instructions in SpinCAD Builder file will fail if there are @x macros between the source and destination

  #45 opened 2 years ago by Digital-Larry
  1

• Error in Generating Hex File

  #44 opened 2 years ago by ozhewett
  5

• Simulator doesn't work unless the "scope" is enabled.

  #42 opened 2 years ago by Digital-Larry
  1

• The Coarse Delay control panel shows "Servo Delay"

  #13 opened 2 years ago by Digital-Larry
  1

• Pot1 is hardwired in ROM reverb 1 block

  #10 opened 2 years ago by Digital-Larry
  1

• Noise AMZ block

  #30 opened 5 years ago by willwaush
  1

• Allow per-pin mute

  #29 opened 5 years ago by Digital-Larry
  0

• add pan control to 6-tap delay

  #28 opened 5 years ago by Digital-Larry
  0

• Add a pattern generator block

  #27 opened 5 years ago by Digital-Larry
  0

• Add a crossfade control to stutter delay block

  #26 opened 5 years ago by Digital-Larry
  0

• Scope function is incomplete

  #25 opened 5 years ago by Digital-Larry
  0

• Add per-block help available from right-click context menu

  #24 opened 5 years ago by Digital-Larry
  0

• Add a visible real-time ASM window

  #23 opened 5 years ago by Digital-Larry
  0

• Issues if generated code > 128 bytes

  #22 opened 5 years ago by Digital-Larry
  0

• Setting simulator to output->file doesn't disable loop mode

  #21 opened 5 years ago by Digital-Larry
  0

• Resource usage is not always updated

  #20 opened 5 years ago by Digital-Larry
  0

• Add the ability to program an EEPROM directly from SpinCAD

  #19 opened 5 years ago by Digital-Larry
  0

• It's possible to open multiple control panels on a single block

  #18 opened 5 years ago by Digital-Larry
  0

• Multiple flags in the Skip instruction will fail

  #17 opened 5 years ago by Digital-Larry
  0

• Deleting one part of a feedback loop should delete the other part as well

  #16 opened 5 years ago by Digital-Larry
  0

• It's possible to create a circular connection in the UI

  #15 opened 5 years ago by Digital-Larry
  0

• If patch info block is open when you change patches, info block doesn't update

  #14 opened 5 years ago by Digital-Larry
  0

• Control panels should only be "on top" of SpinCAD

  #12 opened 5 years ago by Digital-Larry
  0

• Control panel should disappear if its parent block is deleted

  #11 opened 5 years ago by Digital-Larry
  0

• What is "Open Hex" supposed to do?

  #9 opened 6 years ago by jberryman
  2

• File-Open, and scrollable workarea fixes

  #5 opened 6 years ago by sreichholf
  2

• Trunk doesn't compile

  #2 opened 10 years ago by dkmorb
  8