/ioc2rpz

ioc2rpz is a place where threat intelligence meets DNS.

Primary LanguageErlangApache License 2.0Apache-2.0

ioc2rpz™ makes your threat intelligence actionable

License

Short summary

ioc2rpz™: The DNS Security Solution - ioc2rpz™ is a powerful DNS server that transforms threat indicators into actionable Response Policy Zone (RPZ) feeds. It automates the update process, ensuring your network is protected against the latest threats, including malicious domains and IP addresses. By converting IOC feeds into RPZs, ioc2rpz™ acts as a crucial link between threat intelligence and DNS security, compatible with RPZ-supporting DNS servers like ISC Bind or PowerDNS. Learn more about how ioc2rpz™ can secure your network at ioc2rpz™ official website.

Overview

DNS is the control plane of the Internet. Usually DNS is used for good but:

  • It can be used to track users locations and their behaviour;
  • Malware uses DNS to command and control, exfiltrate data or redirect traffic;
  • According with 2016 Cisco annual security report, 91.3% of malware use DNS;
  • Advertisements companies usually use separate and obscure domains to show ads;
  • Free DNS services (e.g. 1.1.1.1, 8.8.8.8, 9.9.9.9 etc) can help you to address some concerns but you can not define your own protection settings or ad filters.

ISC Bind is a de facto a standard of a nameserver. With introduction of Response Policy Zones in the ISC BIND 9.8 it is became a simple task to monitor and contain malware on DNS layer. RPZ is supported on PowerDNS recursor 4.0.0 and later releases. Knot DNS is also partially supports RPZ.

In comparing with traditional network protection solutions a DNS server can handle millions of indicators without performance impact but there were no automated and efficient way to maintain response policy zones on primary DNS servers.

Usually indicators of compromise are distributed in plain text but in different formats and only a few providers of IOCs make them available via RPZ.

ioc2rpz™ is a custom DNS server which automatically converts indicators (e.g. malicious FQDNs, IPs) from various sources into RPZ feeds and automatically maintains/updates them. The feeds can be distributed to any open source and/or commercial DNS servers which support RPZ, e.g. ISC Bind, PowerDNS. You can run your own DNS server with RPZ filtering on a router, desktop, server and even Raspberry Pi. System memory is the only limitation.

With ioc2rpz™ you can define your own feeds, actions and prevent undesired communications.

ioc2rpz™ is a place where threat intelligence meets DNS

ioc2rpz™ transforms IOC feeds into response policy zones (RPZ). You can mix feeds to generate a single RPZ or multiple RPZs. Trusted domains and IPs can be whitelisted. ioc2rpz™ supports expiration of indicators and accordingly rebuilds zones.
Alt ioc2rpz™ The current release supports: local files, files/requests via http/https/ftp and shell scripts to access other resource types. You can use any file format if you can write a REGEX to extract indicators and indicators are separated by newline or/and return carriage chars (/n, /r, /r/n).

How to use ioc2rpz™

You can use ioc2rpz™ with any DNS server which supports Response Policy Zones e.g. recent versions of ISC BIND, PowerDNS and any commertial DNS server based on these products (e.g. Infoblox, Blue Cat, Efficient IP). A sample bind's configuration file (named.conf) is provided in the cfg folder.

ioc2rpz™ web interface

ioc2rpz.gui is a Management Web interface which is developed as a separate project. It is not required to run ioc2rpz™.

DNS over TLS (DoT)

ioc2rpz™ supports RPZ distribution over DoT. The SSL listener service is automatically started on port 853 (PortTLS) if a certificate is provided in the configuration (cert). Current implementation has following limitations:

  • TLS 1.2 only;
  • single request per session;
  • TLS PIN is not supported;
  • DNS Notify messages are unencrypted. When a certificate is expired or is going to expire soon there is no need to restart service if new certificates were saved in the same file. Erlang automatically updates certificates if files were replaced. The delay may be up to 2 minutes because of caching. It is recommended do not let the certificate to expire for service continuity.

ioc2rpz™ vs ISC BIND vs other DNS:

  • ioc2rpz™ was built to handle RPZ distribution only;
  • ioc2rpz™ supports DoT (DNS over TLS) so nobody can easily eavesdrop on your RPZs/indicators;
  • ioc2rpz™ supports as many RPZs as you need;
  • ioc2rpz™ supports live/non cached zones. It creates zones by an incoming request;
  • indicators can be pulled from different sources and via different protocols (e.g. via REST API calls);
  • RPZs are automatically updated;
  • IOC expiration time is used to remove expired indicators in a timely manner;
  • Performance and zone transfer time/size/packets optimizations.

Installation

The easiest way to deploy the service is using docker containers on the docker hub. Deployment on Docker How-To you can find in ioc2rpz™ wiki.

Docker container

ioc2rpz™ is available on the Docker Hub. Just look for ioc2rpz™. Prerequisites:

  • ioc2rpz™ doesn't contain a configuration file, you need to mount /opt/ioc2rpz/cfg to a directory on a host system with the configuration file (ioc2rpz.conf);
  • ioc2rpz™ uses 53/udp (SOA requests only), 53/tcp (AXFRP, IXFR, SOA, MGMT), 853/tcp (AXFRP, IXFR, SOA, MGMT) and 8443/tcp (REST API) ports. The ports should be exposed to a host system;
  • ioc2rpz™ saves ETS database into files for faster boot. You may mount /opt/ioc2rpz/db to a directory on a host system to preserve DB over restarts; You can start ioc2rpz™ with the following command:
sudo docker run -d --name ioc2rpz --log-driver=syslog --restart always --mount type=bind,source=/home/ioc2rpz/cfg,target=/opt/ioc2rpz/cfg --mount type=bind,source=/home/ioc2rpz/db,target=/opt/ioc2rpz/db -p53:53 -p53:53/udp -p853:853 -p8443:8443 pvmdel/ioc2rpz

where /home/ioc2rpz/cfg, /home/ioc2rpz/db directories on a host system.
You can pass a custom configuration file name via-e parameter. E.g. ./cfg/ioc2rpz2.conf

Docker Compose

You can deploy ioc2rpz™ and ioc2rpz.gui using docker compose. The docker-compose.yml file can be found in ioc2rpz.dc repository.

ioc2rpz™ on AWS

You can run ioc2rpz™ and ioc2rpz.gui on AWS. For relatively small deployments (several hundreds thousands indicators) even free tier is enough. The video below shows how to setup ioc2rpz™ and ioc2rpz.gui on AWS using ECS.

How to start ioc2rpz™ service (w/o docker)

ioc2rpz™ by default reads configuration from ./cfg/ioc2rpz.conf, listens on all network interfaces and saves DB backup in ./db directory. You can change the default values in include/ioc2rpz.hrl.
If you downloaded sources, before running ioc2rpz™ you have to compile the code with the following command: rebar3 release.
You can start the application by evoking _build/default/rel/ioc2rpz/bin/ioc2rpz start.

ioc2rpz™ management

via DNS

ioc2rpz™ supports management over DNS/TCP or DoT. It is recommended to use DoT or REST API over DNS/TCP. The current version of ioc2rpz™ does not support a separate management IP/interface. In any case it is highly recommended to create a designated TSIG key (or keys) which will be used for management only. You can turn off management over DNS.
Supported actions:

  • ioc2rpz™ current status. Request ioc2rpz-status, class CHAOS, record TXT. e.g.:
dig +tcp -y dnsmkey_1:ayVnL+h2QKMszRVohrngagcEuIpN3RkecXKdwSa5WsHD5N4Y5R3NUMGM W8sIGv36gPkAtWtgarqKzN9tmHqEnA== @127.0.0.1 ioc2rpz-status TXT -c CHAOS
  • Reload configuration file. RR Name ioc2rpz-reload-cfg, RR Class CHAOS, RR Type TXT
  • Update TSIG keys. RR Name ioc2rpz-update-tkeys, RR Class CHAOS, RR Type TXT
  • Full refresh of all zones. RR Name ioc2rpz-update-all-rpz, RR Class CHAOS, RR Type TXT
  • Full refresh a zone. RR Name zone_name, RR Class CHAOS, RR Type TXT. E.g. full refresh of dga.ioc2rpz can be invoked by:
dig +tcp -y dnsmkey_1:ayVnL+h2QKMszRVohrngagcEuIpN3RkecXKdwSa5WsHD5N4Y5R3NUMGM W8sIGv36gPkAtWtgarqKzN9tmHqEnA== @127.0.0.1 dga.ioc2rpz TXT -c CHAOS
  • Stop ioc2rpz™. RR Name ioc2rpz-terminate, RR Class CHAOS, RR Type TXT
  • Request a sample zone. RR Name sample-zone.ioc2rpz, RR Class IN, RR Type AXFR

via REST

REST API (port 8443/tcp) is the preffered management interface. For serurity reasons all management traffic must be encrypted and REST API interface is not started if there is no SSL certificate. Basic HTTP authentication is used to authenticate requests. ManagementTSIG keys are used for request authentication. A TSIG key name is used as the HTTP username and TSIG key as the password. Access to the REST API is restricted with the ACL.
The REST API supports json (default) and text as an output format based on the "Accept" header. E.g.:

curl -i -u "dnsmkey_1:ayVnL+h2QKMszRVohrngagcEuIpN3RkecXKdwSa5WsHD5N4Y5R3NUMGM W8sIGv36gPkAtWtgarqKzN9tmHqEnA==" --insecure -H "Accept: text/plain" https://127.0.0.1:8443/api/mgmt/update_tkeys

API requests:

  • GET /api/v1.0/update/all_rpz - full refresh of all zones.
  • GET /api/v1.0/update/:rpz - full refresh a zone, where :rpz is the zone name.
  • GET /api/v1.0/mgmt/reload_cfg - reload configuration file.
  • GET /api/v1.0/mgmt/update_tkeys - update TSIG keys.
  • GET /api/v1.0/mgmt/terminate - shutdown ioc2rpz™ server.
  • GET /api/v1.0/feed/:rpz - get content (indicators) of :rpz feed.
  • GET /api/v1.0/ioc/:ioc?tkey=:tkey - check if indicator is blocked by RPZ feeds. An optional param :tkey allows to limit validation to a specific TSIG Key. W/o it the search will be done among all feeds.
  • GET /api/v1.0/cache/sources/clear/all - remove all sources from the hot cache
  • GET /api/v1.0/cache/sources/clear/:source - remove :source source from the hot cache
  • GET /api/v1.0/cache/sources/load/all - load all sources to the hot cache

Configuration file

The configuration is an Erlang file. Every configuration option is an Erlang term so the configuration must comply with Erlang syntax. ioc2rpz™ does not check the configuration file for possible errors, typos etc. ioc2rpz™ supports the following configuration parameters:

  • a single srv record (required);
  • a single cert record (optional);
  • zero or more key records (optional);
  • zero or more whitelist records (optional);
  • one or more source records (minimum one source is required);
  • one or more rpz records (minimum one rpz is required).

srv record

srv record is used to define server default values. It consists of:

  • NS server name used in SOA record;
  • an email address for SOA record (in SOA format);
  • list of management TSIG keys (names only). Please refer the management section for the details.

Sample srv record:

{srv,{"ns1.example.com","support.email.example.com",["dnsmkey_1","dnsmkey_2","dnsmkey_3"],["acl_ip1","acl_ip2"]}}.

cert record

cert record is used to define a certificate and a private key for DNS over TLS communications. It consists of:

  • path to a file containing a certificate;
  • path to a file containing a private PEM-encoded key;
  • path to a file with PEM-encoded CA certificates.

Sample cert record:

{cert,{"cfg/cert.pem", "cfg/key.pem",	"cfg/cacerts.pem"}}.

include record

include record allows to split ioc2rpz™ configuration into multiple files.

Sample include record:

{cert,"cfg/tkeys.include.cfg"}.

key record

TSIG keys are used for authentication and authorization. It is recommended to use different TSIG keys for ioc2rpz™ management and zones transfers.
key record consist of:

  • TSIG key name;
  • algorithm. md5, sha256 and sha512 are supported;
  • the key;
  • (optional) list of key groups it belongs to.

Sample key record:

{key,{"key_name_1","md5","ayVnL+h2QKMszRVohrngagcEuIpN3RkecXKdwSa5WsHD5N4Y5R3NUMGM W8sIGv36gPkAtWtgarqKzN9tmHqEnA=="}}.
{key,{"key_name_1","md5","ayVnL+h2QKMszRVohrngagcEuIpN3RkecXKdwSa5WsHD5N4Y5R3NUMGM W8sIGv36gPkAtWtgarqKzN9tmHqEnA==",["customers","public"]}}.

dnssec-keygen utility can be used to generate TSIG keys. E.g. the command below will generate a TSIG key 512 bits length with "tsig-key" name using MD5 algorithm, and save the key in the files with extensions "key" and "private". A TSIG the key will be the same in the both files.

dnssec-keygen -a HMAC-MD5 -b512 -n USER tsig-key

Please refer "dnssec-keygen" documentation for details.

whitelist record

Whitelists are used to prevent possible errors and blocking trusted domains and IP addresses. The whitelisted IOCs are removed from response policy zones. ioc2rpz™ does check only exact match, so it will not split or discard a network if a whitelisted IP address is included into a blocked subnet and vice versa. A whitelist is a text file or a feed of text data. Indicators should be separated by newline characters (/n,/r or both /n/r). Whitelists must contain valid FQDNs and/or IP addresses. ioc2rpz™ supports unlimited count of indicators.
whitelists record consist of:

  • whitelist name;
  • whitelist path. URLs(http/https/ftp) and local files are supported. Prefix "file:" is used for local files;
  • REGEX which is used to extract indicators. A regular expression must be included in double quotes. If you specify an empty REGEX (""), a default REGEX will be used ("^([A-Za-z0-9][A-Za-z0-9\-\._]+)[^A-Za-z0-9\-\._]*.*$"). none is used if no REGEX is required (the source already provides data in the required format).

Sample whitelist record:

{whitelist,{"whitelist_1","file:cfg/whitelist1.txt",none}}.

source record

A source is a feed of malicious indicators. FQDNs, IPv4 and IPv6-addresses are supported. A source is a text file or a feed of text data. Indicators should be separated by newline/carriage return characters (/n,/r or both /r/n). ioc2rpz™ supports unlimited count of indicators.
source record consist of:

  • source name;
  • source path for full source transfer (AXFR). URLs(http/https/ftp), local files and scripts are supported. Prefix file: is used for local files. Prefix shell: is used to execute a local script/comand on a host/container which should return indicators and optional expiration date to STDOUT;
  • source path for incremental source transfer (IXFR). AXFR,IXFR paths support keywords to shorten URLs and provide zone update timestamps:
    • [:AXFR:] - full AXFR path. Can be used only in IXFR paths;
    • [:FTimestamp:] - timestamp when the source was last time updated (e.g. 1507946281)
    • [:ToTimestamp:] - current timestamp;
  • REGEX which is used to extract indicators and their expiration time. The first match is an indicator, the second match is an expiration time. Expiration time is an optional parameter. A regular expression must be included in double quotes. If you specify an empty REGEX (""), a default REGEX will be used ("^([A-Za-z0-9][A-Za-z0-9\-\._]+)[^A-Za-z0-9\-\._]*.*$"). none is used if no REGEX is required (the source already provides data in the required format). Optional parameters (all or none must be used):
  • UserID (used internally).
  • Maximum # of IoCs.
  • Full source update, hot cache time (in seconds).
  • Incremental source update, hot cache time (in seconds).

Sample source record:

{source,{"blackhole_exp","http://data.netlab.360.com/feeds/dga/blackhole.txt","[:AXFR:]","^([A-Za-z0-9][A-Za-z0-9\-\._]+)\t.*:00\t([0-9: -]+)$"}}.
{source,{"base.rpz1","shell:/usr/bin/dig -y KEYNAME:TSIGKEY @54.69.93.185 base.rpz.infoblox.local axfr | /bin/grep -e CNAME | /bin/grep -v '*.' | /usr/bin/awk -F '.base.rpz' '{print $1}'","",none}}.

Source shell: is used to extend ioc2rpz™ connectivity options which are natively a bit limited. The ioc2rpz™ container includes dig, grep, awk and python. E.g. you can mix different RPZ feeds or fetch data from a database.

rpz record

RPZ term defines a response policy zone.
rpz record consist of:

  • rpz name;
  • SOA refresh time in seconds;
  • SOA update retry time in seconds;
  • SOA expiration time in seconds;
  • SOA NXDomain TTL in seconds;
  • Cache. Possible values: true or false. true defines that the RPZ should be cached, false - non cached, live zone sources are downloaded and an RPZ generated by AXFR request. "Live" zones do not support incremental zone transfer. if RPZ feed is not cached anyway it is temporary stored into a hot cache. In case if a request timeouts from a client, we will be able to respond next time. AXFR time will be used to determine cache life;
  • Wildcards. Possible values: true or false. Defines if wildcard rules should be generated;
  • Action. Supported actions: nxdomain, nodata, passthru, drop, tcp-only, {"redirect_domain","example.com"}, {"redirect_ip","127.0.0.1"} and list of local records [{"local_aaaa","fe80::1"}, {"local_a","127.0.0.1"}, {"local_cname","www.example.com"}, {"local_txt","Text Record"}]. redirect_domain is an alias for local_cname. redirect_ip is an alias for local_a, local_aaaa;
  • List of TSIG keys and key groups;
  • Type of IOCs used in the RPZ: mixed, fqdn, ip. It is used for optimization.
  • Full zone update time in seconds (AXFR Time). Full Zone update and rebuild if MD5 for IOCs is different;
  • Incremental zone update time (IXFR Time). Sources should support incremental updates. "0" means no incremental zone updates;
  • List of the sources;
  • List of DNS servers (IP addresses) which should be notified on an RPZ updates;
  • List of whitelists.

Sample rpz record:

{rpz,{"zone_name",soa_refresh, soa_update_retry,soa_expire,soa_nxdomain_ttl,"cache","wildcards","action",["key1","key2"],"Zone_type",AXFT_Time, IXFR_Time,["source1","source2"],["notify_ip1","notify_ip2"],["whitelist_1","whitelist_2"]}}.

{rpz,{"zone_name",soa_refresh, soa_update_retry,soa_expire,soa_nxdomain_ttl,"cache","wildcards","action",["key1","key2",{groups,["group1","group2"]}],"Zone_type",AXFT_Time, IXFR_Time,["source1","source2"],["notify_ip1","notify_ip2"],["whitelist_1","whitelist_2"]}}.

{rpz,{"mixed.ioc2rpz",7202,3600,2592000,7200,"true","true","passthru",["dnsproxykey_1","dnsproxykey_2"],"mixed",86400,3600,["small_ioc","blackhole","bot.list"],[],["whitelist_1","whitelist_2"]}}.

{rpz,{"mixed.ioc2rpz",7202,3600,2592000,7200,"true","true","passthru",["dnsproxykey_1","dnsproxykey_2",{groups,["public","ip2"]}],"mixed",86400,3600,["small_ioc","blackhole","bot.list"],[],["whitelist_1","whitelist_2"]}}.

Sample configuration file

{srv,{"ns1.rpz-proxy.com","support.rpz-proxy.com",["dnsmkey_3"],["127.0.0.1","10.42.0.10"]}}.
{cert,{"cfg/ioc2rpz_dot.crt", "cfg/ioc2rpz_dot.key",	""}}.

{key,{"dnsproxykey_1","md5","apXqLsDs90H213eV6LS9ryYp5tY8YTpkttOkRCve7dp1Zeob3SGAbaVU9BShpsW25MmR8mTiX5OY0Qetv977Yw=="}}.
{key,{"dnsproxykey_2","sha512","03uuaGl9kqfenjRgIeCv6e29lVvMwviB1+cDX1I0jcVOcTU4jWFwRkfo3ULRMD+NGDfwzYvXkJ94FNEaAW4vzw=="}}.
{key,{"dnsmkey_3","sha512","03uuaGl9kqfenjRgIeCv6e29lVvMwviB1+cDX1I0jcVOcTU4jWFwRkfo3ULRMD+NGDfwzYvXkJ94FNEaAW4vzw=="}}.

{whitelist,{"whitelist_1","file:cfg/whitelist1.txt",none}}.
{whitelist,{"whitelist_2","file:cfg/whitelist2.txt",""}}.

{source,{"small_ioc","file:cfg/small_ioc.txt","[:AXFR:]","^(?!host)(?!ip)\"?\'?([A-Za-z0-9][A-Za-z0-9\-\._]+)[^A-Za-z0-9\-\._]*.*$"}}.
{source,{"dns-bh","http://mirror1.malwaredomains.com/files/spywaredomains.zones","[:AXFR:]","^zone \"([A-Za-z0-9\-\._]+)\".*$"}}.
{source,{"cryptolocker","http://data.netlab.360.com/feeds/dga/cryptolocker.txt","[:AXFR:]","^(?!host)(?!ip)\"?\'?([A-Za-z0-9][A-Za-z0-9\-\._]+)[^A-Za-z0-9\-\._]*.*$"}}.
{source,{"tor-exit","https://torstatus.blutmagie.de/ip_list_exit.php/Tor_ip_list_EXIT.csv","[:AXFR:]",none}}.

{rpz,{"localdata.ioc2rpz",7202,3600,2592000,7200,"false","true",[{"local_aaaa","fe80::1"},{"local_a","127.0.0.1"},{"local_a","127.0.0.2"},{"local_a","127.0.0.3"},{"local_a","127.0.0.4"},{"local_cname","www.example.com"},{"local_txt","Text Record www.example.com"},{"local_txt","Text Record 2"}],["dnsproxykey_1", "dnsproxykey_2"],"mixed",30,30,["small_ioc"],[],["whitelist_1","whitelist_2"]}}.
{rpz,{"dga.ioc2rpz",7202,3600,2592000,7200,"true","true","nodata",["dnsproxykey_1","dnsproxykey_2"],"fqdn",172800,3600,["cryptolocker"],[],[]}}.
{rpz,{"mixed.ioc2rpz",7202,3600,2592000,7200,"true","true","passthru",["dnsproxykey_1", "dnsproxykey_2"],"mixed",86400,3600,["small_ioc","dns-bh","cryptolocker"],[],["whitelist_1","whitelist_2"]}}.
{rpz,{"dns-bh.ioc2rpz",7202,3600,2592000,7200,"true","true","nxdomain",[],"mixed",86400,3600,["dns-bh"],[],["whitelist_1","whitelist_2"]}}.
{rpz,{"tor-exit-ip.ioc2rpz",7202,3600,2592000,7200,"false","true","nxdomain",["dnsproxykey_1","dnsproxykey_2"],"ip",172800,0,["tor-exit"],[],[]}}.

Predefined configuration values - include/ioc2rpz.hrl

include/ioc2rpz.hrl contains pre-compiled parameters.

Standard parameters:

  • MGMToDNS (true/false) - enabled management over DNS/TCP;
  • DBStorage (ets) - defines DB storage for AXFR and IXFR caches. Current version supports ETS only;
  • SaveETS (true/false) - defines if ETS AXFR/IXFR tables should be saved on disk;
  • Port (numerical value, 1 - 65535) - defines a DNS port on which service is running;
  • PortTLS (numerical value, 1 - 65535) - defines a DoT port on which service is running;
  • PortREST (numerical value, 1 - 65535) - defines a HTTPs port on which service is running;
  • TTL (numerical value, in secodns) - default TTL for DNS records/RPZ rules.
  • DefConf (string) - default configuration file;
  • DefDB (string) - default database path;
  • logTS - if defined timestamp is added in log messages;
  • debug - if defined debug log messages are printed;

Optimization parameters:

  • DNSPktMax (numerical value, 100 - 65535) - maximum packet size. Recommended values:
    • 16384 - minimal zone transfer size;
    • 65535 - minimal count of DNS packets;
  • Compression (numerical value, 0 - 9) - Compression level (0 - no compression, 9 - highest compression). AXFR cache and tables on a disk store compressed data;
  • ZoneRefTime (numerical value, in milliseconds) - defines zone refresh check interval;
  • TCPTimeout (numerical value, in milliseconds) - defines TCP session timeout;
  • HotCacheTime (numerical value, in seconds) - Hot cache time for IOCs, Rules, Packets. Live zones are stored in a hot cache;
  • HotCacheTimeIXFR (numerical value, in seconds) - Hot cache time for IXFR IOCs in a hot cache. By default IXFR indicators are cached for a minute (even if it set to 0) because current serial is always rounded to a previous minute.

How the AXFR (full) and IXFR (incremental) caches are updated

  • AXFR cache always contains prebuilt zones without SOA/NS/TSIG records. Prebuilt means all records are splitted by packets and labels were shortened/zipped.
  • If a server receives an AXFR request it retrieves packets from the AXFR cache, adds SOA/NS records and TSIG if needed.
  • AXFR zones update should be considered as a clean up procedure, which should periodically take place. Just to be sure that there is no desynchronization between the sources and the cache.
  • For large zones, AXFR updates should be scheduled infrequently to minimize impact on a server's performance and amount of transferred data to all clients.
  • All changes if it is possible should be done via incremental zone updates. In that case the AXFR cache will be rebuilt only in case if a zone was updated.
  • [TODO] Due to an optimization, only last packet will be rebuilt for new IOCs and relevant and accordant packets for the expired IOCs.
  • IXFR cache contains only IOCs and expiration dates. [TODO] and packets ID's (to make it possible rebuild the zone fast).
  • RPZ record contains current zone Serial and Serial_IXFR. Serial_IXFR serve as a minimum incremental zone serial which is available for an incremental zone transfer.
  • IXFR cache is flushed after full zone update (AXFR). Serial_IXFR = Serial. Clients will receive full zone update in any case, this is why it is important to have AXFR zone transfer infrequently.
  • When IXFR cache is updated, AXFR cache must be rebuilt.
  • If a zone does not support IXFR updates -> it doesn't saved in the IXFR table.
  • Live zones are not cached in the AXFR, IXFR caches but the sources (IOCs) can be cached in the hot cache.

Hot cache

All IOCs, Rules, Packets including live RPZs are stored in the hot cache. Pre-compiled parameters HotCacheTime, HotCacheTimeIXFR define storage time.

How to try ioc2rpz™ (or sample and free RPZ feeds hosted by ioc2rpz™)

Disclaimer

The author assumes no responsibility or liability for any errors or omissions in the content of these RPZ feeds. The feeds are provided on an “as is” basis with no guarantees of completeness, accuracy, usefulness or timelines to demonstrate ioc2rpz™ technology only. The RPZ feeds service distirbution may be interrupted or stopped w/o any advance notice. The author is not lialable for any direct or inderect damages caused by using this service.

RPZ Feeds

You may test ioc2rpz™ technology if you register on the ioc2rpz™ community with the following feeds:

Sample bind configuration

options {
  #This is just options for RPZs. Add other options as required
  recursion yes;
  response-policy {
    ####FQDN only zones
    ####Mixed zones
    zone "dns-bh.ioc2rpz" policy nxdomain;
    zone "phishtank.ioc2rpz" policy nxdomain;
    ####IP only zones
  } qname-wait-recurse no break-dnssec yes;
};

key "ioc2rpz-YOUR-UNIQUE-KEY-NAME"{
  algorithm hmac-sha256; secret "ioc2rpz-YOUR-UNIQUE-KEY";
};


zone "dns-bh.ioc2rpz" {
  type slave;
  file "/var/cache/bind/dns-bh.ioc2rpz";
  masters {94.130.30.123  key "ioc2rpz-YOUR-UNIQUE-KEY-NAME";};
};


zone "phishtank.ioc2rpz" {
  type slave;
  file "/var/cache/bind/notracking.ioc2rpz";
  masters {94.130.30.123  key "ioc2rpz-YOUR-UNIQUE-KEY-NAME";};
};

Sample PowerDNS configuration

rpzMaster("94.130.30.123", "dns-bh.ioc2rpz", {defpol=Policy.NXDOMAIN, tsigname="ioc2rpz-YOUR-UNIQUE-KEY-NAME", tsigalgo="hmac-sha256", tsigsecret="ioc2rpz-YOUR-UNIQUE-KEY"})
rpzMaster("94.130.30.123", "notracking.ioc2rpz", {defpol=Policy.NXDOMAIN, tsigname="ioc2rpz-YOUR-UNIQUE-KEY-NAME", tsigalgo="hmac-sha256", tsigsecret="ioc2rpz-YOUR-UNIQUE-KEY"})
rpzMaster("94.130.30.123", "phishtank.ioc2rpz", {defpol=Policy.NXDOMAIN, tsigname="ioc2rpz-YOUR-UNIQUE-KEY-NAME", tsigalgo="hmac-sha256", tsigsecret="ioc2rpz-YOUR-UNIQUE-KEY"})

Sample Infoblox configuration (import file)

header-responsepolicyzone,fqdn*,zone_format*,rpz_policy,substitute_name,view,zone_type,external_primaries,grid_secondaries,priority
responsepolicyzone,dns-bh.ioc2rpz,FORWARD,Nxdomain,,default,responsepolicy,srv_1/94.130.30.123/FALSE/FALSE/TRUE/ioc2rpz-YOUR-UNIQUE-KEY-NAME/ioc2rpz-YOUR-UNIQUE-KEY/HMAC-SHA256,infoblox.localdomain/False/False/False,0
responsepolicyzone,phishtank.ioc2rpz,FORWARD,Nxdomain,,default,responsepolicy,srv_1/94.130.30.123/FALSE/FALSE/TRUE/ioc2rpz-YOUR-UNIQUE-KEY-NAME/ioc2rpz-YOUR-UNIQUE-KEY/HMAC-SHA256,infoblox.localdomain/False/False/False,1

Sample DIG (to get SOA)

dig  @94.130.30.123 -y hmac-sha256:ioc2rpz-YOUR-UNIQUE-KEY-NAME:ioc2rpz-YOUR-UNIQUE-KEY dns-bh.ioc2rpz SOA
dig  @94.130.30.123 -y hmac-sha256:ioc2rpz-YOUR-UNIQUE-KEY-NAME:ioc2rpz-YOUR-UNIQUE-KEY phishtank.ioc2rpz SOA

kdig @94.130.30.123 -y hmac-sha256:ioc2rpz-YOUR-UNIQUE-KEY-NAME:ioc2rpz-YOUR-UNIQUE-KEY dns-bh.ioc2rpz SOA +tls

Some free threat intelligence feeds

You can find other IOC feeds on the wiki-page: https://github.com/Homas/ioc2rpz/wiki/IOC-Sources.

References

Do you want to support to the project?

You can support ioc2rpz™ project and ioc2rpz™ community (https://ioc2rpz.net) via GitHub Sponsor (recurring payments). To make one time donation you can use PayPal or Zelle (our email: zelle [at] ioc2rpz [.] net).

Supporters

Shout out to craSH and rrbone who support my projects on GitHub Sponsor.

Contact us

You can contact us by email: feedback(at)ioc2rpz[.]net or in Telegram.

License

Copyright 2017 - 2024 Vadim Pavlov ioc2rpz[at]gmail[.]com

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0  

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.