The FiiO BTA30 is a Hi-Fi-grade DAC and Bluetooth Transceiver, featuring USB-C for Data and Power, RCA analog output and also SPDIF in and out via both TOSLINK and Coax. According to the marketing material, a Qualcomm CSR8675 Bluetooth Chip is used.
While it does work out of the box, there are some additional tunables available via the official "FiiO Control" Android App. These include things such as the power-on-behaviour, whether the output level should be locked or which codecs should be used.
The app itself works fine, however it is unclear how long it will stay that way given that it is an Android app. Thus, here's some documentation on the protocol.
This may also be adaptable to other similar FiiO devices, however I only have a BTA 30.
The FiiO BTA 30 uses Bluetooth Low Energy (BLE) for all its configuration needs. As with most BLE appliances, the implementation could be described as strange.
It seems that all FiiO-specific functionality is just piggybacked on top of the generic Qualcomm CSR102x OTAU
functionality,
which is probably some sample code provided by Qualcomm and it was just easier that way? Who knows.
Said OTAU characteristic is documented by Qualcomm in a PDF named csr102x_otau_overview.pdf
, which I won't mirror here
due to copyright concerns. At the time of writing, it is available for download off the official Qualcomm servers:
https://developer.qualcomm.com/qfile/34081/csr102x_otau_overview.pdf
As the name suggest, there also seems to be some over-the-air-firmware-update functionality available, however it seems like that doesn't apply to the BTA30 (yet?)
Firware updates would likely be stored somewhere below http://fiio-bluetooth.oss-cn-beijing.aliyuncs.com/
.
There currently (2022-05-19) is a subfolder named BTA30, however it doesn't seem to contain a new firmware image.
We have one service with UUID 00001100-d102-11e1-9b23-00025b00a5a5
named CSR GAIA
according to the Qualcomm docs.
This service features three characteristics:
-
00001101-d102-11e1-9b23-00025b00a5a5
(CSR GAIA Command Endpoint
) Commands will be written to this characteristic -
00001102-d102-11e1-9b23-00025b00a5a5
(CSR GAIA Response Endpoint
) Replies to commands will be provided via this characteristic as notifications. It needs to be subscribed first before any commands are sent -
00001103-d102-11e1-9b23-00025b00a5a5
(CSR GAIA Data Endpoint
) No idea what this does
Command requests are written to the CSR GAIA Command Endpoint
characteristic.
These consist of at least four bytes but may be longer if there is a payload.
The first 20 bits are a magic while the next 12 bits contain the command ID. After that, there may be 0-n bytes of payload.
Let's look at some examples to make this easier.
This is an example without any payload
00 0a 04 3d
- First, there's the magic:
0x000a0
- Then, there's the command:
0x43d
That's it.
Command 0x43d
is the GET_LED_OFF
command.
On success, you will get the following response: 00 0a 84 3d 00 01
.
If your LED_OFF setting is false, then the 0x01 at the end will of course be 0x00
.
Here's an example that features a payload:
00 0a 04 0b 01
- First, there's the magic:
0x000a0
- Then, there's the command:
0x40b
- Finally, there's the payload:
0x01
Command 0x41c
is the Set Boot Mode
command and 0x01
means true.
On success, you will get the following response: 00 0a 84 1c 00 01
.
Command replies are provided via notifications of the CSR GAIA Response Endpoint
characteristic.
These consist of at least five bytes but may be longer if there is a payload. The first 20 bits are a magic while the next 12 bits contain the command ID. This is followed by a single null byte. After that, there may be 0-n bytes of payload.
Let's look at some examples to make this easier.
This is an example without any payload:
00 0a 84 25 00
- First, there's the magic:
0x000a8
- Then, there's the command:
0x425
- Finally, there's the null byte
0x00
Command 0x425
is the Power Off
command, which just turns of the device.
Hence, there's no need for a payload. The reply confirms the successful receive of the command.
Here's an example that features a payload:
00 0a 84 1c 00 01
- First, there's the magic:
0x000a8
- Then, there's the command:
0x41c
- Then, there's the null byte
0x00
- Finally, there's the payload:
0x01
Command 0x41c
is the Boot Mode
command and 0x01
means true.
Thus, this message means that the BTA 30 will turn on as soon as it receives power.
If this was 0x00
you'd still have to manually press the power button.
Here are all available commands. Some of them may be read-only. Others can be written
Description:
The Device Version + Type
GET Command:
0x418
Response:
3 Byte
- Major Version
- Minor Version
- Device Type (Always
D4
for the BTA30)
Description:
The Codec used by the current connection
Command:
0x416
Payload:
One Byte
Decimal:
- 0 = A2DP OFF
- 1 = SBC
- 3 = AAC
- 5 = APTX
- 7 = APTX HD
- 10 = LDAC
Description:
Whether the Device should turn on as soon as it receives power
GET Command:
0x41C
SET Command:
0x40B
Payload:
Either 0x00
or 0x01
Description:
Whether the Device LEDs should be on or off
GET Command:
0x43D
SET Command:
0x43E
Payload:
Either 0x00
or 0x01
Description:
Whether the LED flashes red-green or red-blue during connection setup
GET Command:
0x44A
SET Command:
0x44B
Payload:
Either 0x00
for red-green or 0x01
for blue-red
Description:
Fetch the current TX LDAC Quality Setting
GET Command:
0x44C
SET Command:
0x44D
Payload:
1 Byte
- Audio quality first (
0x01
) - Standard (
0x02
) - Connection first (
0x03
) - Adaptive (
0x04
)
Description:
Whether the SPDIF Output level should be controlled by the volume knob
GET Command:
0x452
SET Command:
0x453
Payload:
Either 0x00
or 0x01
Description:
Whether the DAC should upsample the audio data to 384KHz
GET Command:
0x450
SET Command:
0x451
Payload:
Either 0x00
or 0x01
Description:
The current volume setting.
This is usually controlled by the knob on the device.
GET Command:
0x412
SET Command:
0x402
Payload:
1 Byte 0x00
-0x3C
Decimal 0-60
Description:
The current DAC lowpass setting
GET Command:
0x411
SET Command:
0x401
Payload:
1 Byte
- Sharp Roll-Off Filter (
0x00
) - Slow Roll-Off Filter (
0x01
) - Short Delay Sharp Roll-Off Filter (
0x02
) - Short Delay Slow Roll-Off Filter (
0x03
)
Description:
The current balance setting.
Values can be between L12 and R12 with 0 being R0 0x0200
GET Command:
0x413
SET Command:
0x403
Payload:
2 Byte
- L (
0x01
) or R (0x02
) - 0-12 Decimal Left or Right (
0x00
-0x0C
)
Description:
The bluetooth name advertised by the device. 30 Bytes UTF-8 max
GET Command:
0x445
SET Command:
0x446
Description:
Because the name can be up to 30 UTF-8 bytes long, this command behaves a bit differently from the others.
One Set Name
command may consist of up to four writes. You may even use emoji
This example contains the short name Hallo
and therefore needs no splitting as it fits in a single message.
00 0a 04 46 ff 05 48 61 6c 6c 6f ff
- First, there's the magic:
0x000a0
- Then, there's the command:
0x446
- Then, there's the start of payload marker:
0xff
- Then, there's the length of the name payload:
0x05
- Then, there are the UTF-8 Bytes of
Hallo
:0x48616c6c6f
- Finally, there's the end of payload marker:
0xff
This example contains the 30 character long name KlausKlausKlausKlausKlausKlaus
, which was split into four messages.
00 0a 04 46 ff 1e 4b 6c 61 75 73 4b 6c 61
-KlausKla
00 0a 04 46 75 73 4b 6c 61 75 73 4b 6c 61
-usKlausKla
00 0a 04 46 75 73 4b 6c 61 75 73 4b 6c 61
-usKlausKla
00 0a 04 46 75 73 ff
-us
In this example, the 0x1e
represents the length of 30 characters.
The same logic applies to the get name response. Here, the name is FiiO BTA30
.
00 0a 04 46 ff 0a 46 69 69 4f 20 42 54 41
- Length: 0x0a (10),FiiO BTA
00 0a 04 46 33 30 ff
-30
Description:
Fetch/select which sources are enabled for the mode
GET Command:
0x448
SET Command:
0x449
GET Payload:
1 Byte
0x01
for RX, 0x02
for TX
GET Response/SET Payload:
2 Bytes
0x01
for RX,0x02
for TX- Settings
- USB (
0x01
) - Coax (
0x02
) - USB & Coax (
0x03
)
- USB (
Description:
Fetch/select the volume mode setting for the mode
GET Command:
0x44E
SET Command:
0x44F
GET Payload:
1 Byte
0x01
for RX, 0x02
for TX
GET Response/SET Payload:
2 Bytes
0x01
for RX,0x02
for TX- Settings
- Adjustable (
0x01
) - Fixed at 30% (
0x02
) - Fixed at 50% (
0x03
) - Fixed at 70% (
0x04
) - Fixed at 100% (
0x05
)
- Adjustable (
Description:
Fetch/set the enabled codecs for the mode
APTX-LL seems to only be available in TX?
GET Command:
0x417
GET Command:
0x407
GET Payload:
1 Byte
0x01
for RX, 0x02
for TX
GET Response/SET Payload:
2 Bytes
0x01
for RX,0x02
for TX- Sum of supported codecs
- AAC (
2
) - LDAC (
4
) - APTX (
8
) - APTX-LL (
16
) - APTX-HD (
32
)
- AAC (
Description:
Does a factory reset
Command:
0x404
Response:
None
Description:
Turns off the BTA30
Command:
0x425
Response:
None
Description:
Delete all pairing information from the BTA30
Command:
0x443
Response:
None