GlanceClock is a 22.8cm diameter wall clock with BLE connectivity. It features a 32x8 LED Matrix Display as well as four 48-LED RGB Rings for text and other visualisations.
Its purpose is to act as an output device for notifications, weather information, appointments etc.
The device requires both a cloud account as well as an internet-connected smartphone to relay commands to the clock.
This repository aims to gather all information needed to build a cloudless bridge device which enables use of all Clock features using MQTT/REST/etc.
Communication is straightforward. The only requirement is to successfully pair (using PIN) with the Clock.
Then, all communication is done by reading and writing to characteristic 5075fb2e-1e0e-11e7-93ae-92361f002671 (0x2901) of service 5075f606-1e0e-11e7-93ae-92361f002671.
There are other characteristics and services which are used for e.g. firmware updates. These haven't been documented yet.
Data serialization is done using protocol buffers. (See Glance.proto)
Reading 0x2901 returns a Settings message with the current settings.
Writing 0x2901 with a command + serialized payload executes said command.
gatttool --sec-level=high -b CLOCK_MAC -t random --char-write-req -a 0x001f -n 023000002203120141 sends a Notify command with a serialized Notice message.
It will display the letter A, play the default notice sound General_alert_1 as well as the default animation Pulse in the default color Lime
Please note that gatttool is deprecated and should therefore not be used anymore.
Using BlueZ >= 5.50 (e.g. Debian Buster) pairing is straightforward.
Utilizing the interactive console of bluetoothctl it is done by executing the following commands:
power off
power on
agent on
default-agent
menu scan
transport le
back
scan on
Now, the Glance clock should appear. Press the Pairing button on the clock and enter pair CLOCK_MAC.
If everything is working properly, you should get a PIN prompt. Enter the one displayed on the clock and press enter.
The clock should play an animation and pairing is done.
If not, remove the device using remove CLOCK_MAC and try again from the start.
Note that you must get a PIN prompt. Otherwise interacting with the clock will not work.
For Time Synchronization, the clock polls a Current Time Service GATT Service on the central device on connect.
Check the specification for more information on that: https://www.bluetooth.com/specifications/gatt/services/
These are all in decimal
| Command | Sequence | PayloadMessage | Description |
|---|---|---|---|
| CustomScene | 0,0,i,j | CustomScene | i = Display mode 0 exclusive; 8 watchface; 24 ring & text j = scene slot |
| Notify | 2,i,0,j | Notice | i = scene_priority Known j values 0 => default? ifttt 6 => Weather |
| Timer | 3,0,0,0 | Timer | |
| Alarm | 4,47,0,0 | ?? | |
| Settings | 5,0,0,0 | Settings | |
| CallScene | 6,83,0,103 | Notice | With modificator 129?? On call end, ScenesDelete with SceneId 103 gets executed |
| SaveForecastScene | 7,i,j,k | ForecastScene | i:? prio maybe? j: 8 => only ring, 16 => only text, 24 => ring & text k: scene slot |
| SaveAppointmentsScene | 8,0,i,7 | AppointmentsScene | i can be either 0 or 8. 0 is only alerts, 8 is alerts + watchface. 7 seems to be the scene slot |
| TimerStop | 10 | - | |
| AlarmStop | 20 | - | |
| AlarmClear | 21 | - | |
| ScenesStop | 30 | - | Go to previous scene slot. Screen turns black for a moment |
| ScenesStart | 31 | - | Go to next scene slot |
| ScenesClear | 32 | - | Clear all scenes. Also hides Digital Clockface until new scenes arrive or settings are updated |
| ScenesDelete | 33,0,0,i | - | i = scene slot |
| ScenesDeleteMany | 34,0,i,j | - | i = To Slot, j = From Slot |
| UpdateAndRefresh | 35 | - | Displays cloud update animation and refreshes the screen |
| EnableAutomaticNightMode | 40 | - | |
| DisableAutomaticNightMode | 41 | - | |
| ??? | 41 | - | Seems to hide the watchface |
| BondsClear | 42 | - | Remove all paired devices |
| StartCalibration | 43 | - | Starts the calibration |
| ConfirmCalibration | 44 | - | Confirm the calibration |
| ??? | 45 | - | Some kind of alarm with notes on screen |
| ClearUserInfo | 50,0,0,0,0 | - | Removes all paired devices and shuts off the clock. |
| BrightnessSceneStop | 60 | - | |
| BrightnessSceneStart | 61 | - | |
| DSP_STATE_SHOW | 70 | - | Displays a long number. Maybe serial? |
It is possible to omit trailing zeroes.
| Name | ID |
|---|---|
| CUSTOM_SCENE_TYPE | 0 |
| CALENDAR_TYPE | 1 |
| NOTIFY_TYPE | 2 |
| TIMER_TYPE | 3 |
| ALARM_TYPE | 4 |
| SETTINGS_TYPE | 5 |
| CALLS_TYPE | 6 |
| TIMERS_CLEAR_TYPE | 10 |
| ALARMS_STOP_TYPE | 20 |
| ALARMS_CLEAR_TYPE | 21 |
| SCENES_STOP_TYPE | 30 |
| SCENES_START_TYPE | 31 |
| SCENES_CLEAR_TYPE | 32 |
| SCENES_DELETE_TYPE | 33 |
| ANCS_START_TYPE | 40 |
| ANCS_STOP_TYPE | 41 |
| BONDS_CLEAR_TYPE | 42 |
| HOMING_START_TYPE | 43 |
| HOMING_CONFIRM_TYPE | 44 |
| USER_INFO_CLEAR | 50 |
| BRIGHTNESS_SCENE_STOP_TYPE | 60 |
| BRIGHTNESS_SCENE_START_TYPE | 61 |
| DSP_STATE_SHOW_TYPE | 70 |
| Name | ID |
|---|---|
| TASK_PRIORITY_TIMER | 46 |
| TASK_PRIORITY_ALARM | 47 |
| TASK_PRIORITY_TIMER_END | 80 |
| TASK_PRIORITY_PWR_STATE | 81 |
| TASK_PRIORITY_CALL | 83 |
| TASK_PRIORITY_PIN_CODE | 90 |
| TASK_PRIORITY_GREATINGS | 255 |
| Name | ID |
|---|---|
| SCENE_PRIORITY_BAND_LOW | 1 |
| SCENE_PRIORITY_SYSTEM_IDLE | 1 |
| SCENE_PRIORITY_EMUN_MAX | 15 |
| SCENE_PRIORITY_BAND_MEDIUM | 16 |
| SCENE_PRIORITY_BAND_SYSTEM | 32 |
| SCENE_PRIORITY_SYSTEM_MSG | 33 |
| SCENE_PRIORITY_BAND_HIGH | 48 |
| SCENE_PRIORITY_BAND_HIGHEST | 64 |
| SCENE_PRIORITY_BAND_CRITICAL | 80 |
There are icon characters available which you can use in any TextData you like
| Charcode | Icon |
|---|---|
| 128 | House |
| 129 | Phone |
| 130 | Clock |
| 131 | Plug |
| 132 | Smartphone |
| 133 | Star/Sun/Bright |
| 134 | Smiley |
| 135 | A huge nearly-all pixel white block |
| 136 | Nothing |
| 137 | 0/3 Battery |
| 138 | 1/3 Battery |
| 139 | 2/3 Battery |
| 140 | 3/3 Battery |
| 141 | Bell with diagonal line |
| 142 | Speaker off |
| 143 | Thermometer |
| 144 | Droplet |
| 145 | Heart |
| 146 | Barometer (?) |
| 147 | Pipe with arrow left |
| 148 | Arrow right with pipe |
| 149 | Umbrella |
| 150 | Bell |
| 151 | Speaker |
| 152 | Wind speed |
| 153 | Cloud |
| 154 | Missing Character |
| 176 | ° |
If something goes horribly wrong, push and hold the reset button + Power button. Let go of the reset button and keep holding the Power button until the LED blinking pattern changes. Then release it as well.
Please note that this will also reset the firmware back to the factory version.
You can find firmware images, the official website documentation and more here.
It is possible and recommended to flash Firmware ZIP files using the nRF Toolbox App.
Taken from the offical Website + App Version 2.0.1:
Night mode activates a digital clock that you can see at night when the hands are not visible.
In Night mode all integrations that set up As a clock Face (ACF) are disappeared, the sound is muted, but notifications will still be displayed.
When it's dark to see the clock hands, the digital time will be shown on the clock face automatically. Uses internal ambient light sensor built into the clock
When you perform calibration hands don't reach 12:00 when there is a green segment, but stop at 11:59. Please take off the minute hand and place it back to make hands straight at 12:00. Probably the hands were mechanically misaligned a bit.
Concerning what is most likely command 35:
Yes, we have added this icon to show that Clock is doing something and responding to changes. Otherwise, if you change an As Clock Face you may not see anything for 10-15 seconds before the face is changed.
The structure of this readme was plagiarized from https://github.com/aprosvetova/xiaomi-kettle
Some messages were analyzed using https://github.com/jmendeth/protobuf-inspector/