Tool that sends many SNMP traps for load test of SNMP manager
Send SNMP traps by multi threads.
Each thread is made by each section in configurations file.
After specific time, each thread is stopped and output the number of sent trap.
-
General constraint
- Support protocol: only UDP
- Support address: only ipv4
- Support SNMP version: v1, v2c
- Support variable bindings: supported types are only string and integer.
- Time ticks of trap: fixed number(12345)
-
SNMP v2c constraint
- Request id of trap: fixed number(12345)
Sample configuration file is here.
- Specific information of each thread of sending traps.(SNMP v1)
| Option | Value | Description |
|---|---|---|
| snmp_version | 1 | SNMP version. |
| snmp_community | public | Community name for trap. (default: public) |
| agent_ip_address | 192.168.xxx.xxx | Source address of trap. (default: 127.0.0.1) |
| enterprise_oid | .1.3.6.1.4.1.xxxx | Enterprise id of trap. |
| generic_trap | 6 | Generic trap of trap. |
| specific_trap | 1001 | Specific id of trap. |
| varbind | .1.3.6.1.4.1.xxxx.1 s Hello world. | LF separated list of oid, type and message. (#1) (optional) |
- Specific information of each thread of sending traps.(SNMP v2c)
| Option | Value | Description |
|---|---|---|
| snmp_version | 2c | SNMP version. |
| snmp_community | public | Community name for trap. (default: public) |
| snmptrap_oid | .1.3.6.1.4.1.xxxx.0.1001 | SNMP trap oid of trap. |
| varbind | .1.3.6.1.4.1.xxxx.1 i 12345 | LF separated list of oid, type and message. (#1) (optional) |
(#1) If you use multiple values, you need to insert a space in front of new line.
- Following types are supported.
| Value | Description |
|---|---|
| s | String |
| i | Integer |
git clone https://github.com/IMOKURI/bulk-snmptrap-tool.git
stack setup
stack install
Usage: bulk-snmptrap-tool --config CONFIGFILE --host HOSTNAME [--port PORT]
[--intval INTERVAL(microsec)] [--timer TIMER(sec)]
You can use multi cores by adding with '+RTS -N' option to improve
performance.
Available options:
-h,--help Show this help text
--config CONFIGFILE CONFIGFILE that is used for sending SNMP traps
--host HOSTNAME HOSTNAME that is sent SNMP traps
--port PORT PORT that is sent SNMP traps (default: "162")
--intval INTERVAL(microsec)
Transmission INTERVAL (microsecond
(10^-6)) (default: 1000000)
--timer TIMER(sec) Transmission TIMER (second) (default: 10)
If this program throw the StackOverflow Exception and you have huge memory, you
may avoid this exception by adding with '+RTS -K???M' option. (default: 8M)
- Add tests.
See LICENSE file