PCB view:
Potted view:
-
PCB specifications:
- 1.6mm PCB thinknes
- 0.152mm (6mil) trace to trace and trace to polygon clearance
- 1mm RF line thinknes
-
Mehanical specifications:
- Device dimensions 78x48x18mm (with cattle tag) / 58x48x18mm (without cattle tag)
- Device weight: ~50g
- Device is put in polyurethane resin to protect it (https://electrolube.com/product/ur5528-chemically-resistant-polyurethane-resin/)
- Inside of the device is EMC shield around MCU and RF components to protect them from resin
- Resin thinknes arount the device is 2mm
-
Future changes:
- TBD
Currently under development, for all information see the schematic PDF file.Produced board versions can be found in the release section of the repository.
Latest release: v0.1
All comments and suggestions can be added to the Issues section of the repo.
Pangolin tracker hardware with documentation is licensed under CERN OHL v.1.2. license.
What this means is that you can use this hardware and documentation without paying a royalty and knowing that you'll be able to use your version forever. You are also free to make changes but if you share these changes then you have to do so on the same conditions that you enjoy.
IRNAS is name and mark of Institute IRNAS Rače. You may use these name and terms only to attribute the appropriate entity as required by the Open Licence referred to above. You may not use them in any other way and in particular you may not use them to imply endorsement or authorization of any hardware that you design, make or sell.