/trezor-core

:lock: TREZOR Core

Primary LanguageCOtherNOASSERTION

TREZOR Core

TREZOR Logo

Build Status Gitter

This is the core of the upcoming TREZOR v2.

Documentation

Build instructions for emulator

Run the following to checkout the project:

git clone --recursive https://github.com/trezor/trezor-core.git
cd trezor-core

Linux

Debian/Ubuntu

sudo pip3 install --no-cache-dir pyblake2

sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install scons libsdl2-dev:i386 libsdl2-image-dev:i386 gcc-multilib

make build_unix

Fedora

sudo pip3 install --no-cache-dir pyblake2

sudo yum install scons SDL2-devel.i686 SDL2_image-devel.i686

make build_unix

openSUSE

sudo pip3 install --no-cache-dir pyblake2

sudo zypper install scons libSDL2-devel-32bit libSDL2_image-devel-32bit

make build_unix

Arch

sudo pip3 install --no-cache-dir pyblake2

sudo pacman -S gcc-multilib scons lib32-sdl2 lib32-sdl2_image

make build_unix

OS X

pip3 install --no-cache-dir pyblake2

brew install scons sdl2 sdl2_image

make build_unix

Windows

Not supported yet ...

Build instructions for ARM

Linux

For flashing firmware to blank device (without bootloader) use make flash, or make flash STLINK_VER=v2-1 if using a ST-LINK/V2.1 interface.

Debian/Ubuntu

sudo pip3 install --no-cache-dir pyblake2

sudo apt-get install gcc-arm-none-eabi libnewlib-arm-none-eabi

make build_boardloader build_bootloader build_firmware

OS X

  1. Download gcc-arm-none-eabi
  2. Follow the install instructions
  3. To install stlink, run brew install stlink
  4. Run make build_boardloader build_bootloader build_firmware