/Toon_Smartswitch

This component reads and displays sensor values from the Fibaro Wall Plug connected to a rooted TOON thermostat.

Primary LanguagePython

Toon Smartswitch Component

This is a Custom Component for Home-Assistant (https://home-assistant.io). The code is based on the TOON Smart Meter Sensor Component from Cyberjunky (https://github.com/cyberjunky/home-assistant-toon_smartmeter/blob/master/info.md) You can read and control a Z-Wave Fibaro Wall Plug (https://www.fibaro.com/en/products/wall-plug/) from the meteradapter connected to a rooted TOON thermostat, the Fibaro Wall Plug must be paired to a TOON thermostat.

Installation

Manual

  • Copy directory toon_smartswitch to your <config dir>/custom_components directory.
  • Configure with config below.
  • Restart Home-Assistant.

Usage

To use this component in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry

sensor:
  - platform: toon_smartswitch
    host: IP_ADDRESS
    port: 10080
    scan_interval: 10
    resources:
    - elecusageflowfib
    - elecusagecntfib

Configuration variables:

  • host (Required): The IP address on which the TOON can be reached.
  • port (Optional): Port used by your TOON. (default = 10080)
  • scan_interval (Optional): Number of seconds between polls. (default = 10)
  • resources (Required): This section tells the component which values to display.