OPTIGA™ Connect IoT is an embedded SIM (eUICC) turnkey solution that enables cellular connectivity at scale for IoT devices.
OPTIGA™ Connect IoT consists of an eUICC including GSMA compliant eSIM operating system and pre-loaded bootstrap connectivity.
- Remote SIM provisioning compliant with GSMA SGP.02 V3.2
- Compliant with 2G, 3G, 4G (LTE), CDMA, NB-IoT, CAT-M networks
- Tata Communications bootstrap - worldwide coverage
- Allows to accommodate multiple MNO profiles
- OTA capable
- 32-bit architecture based on Arm® SecurCore® SC300 enhanced by Infineon Technologies' cache and security technology
- ISO/IEC 7816 UART interface
- Power Supply 1.8/3/5 Volts
- Common Criteria EAL5+ certified hardware
- VQFN-8 package (MFF2)
- Removable SIM and other packages on request
- IoT end nodes and edge gateways
- Smart Home (security, alarm, light-HVAC-Energy control)
- iHealth monitoring
- Smart City (security, lighting, parking sensor)
- Industry Automation (smart machines, security camera, factory automation, asset tracking)
- Smart Energy (metering, storage, distribution)
- Commercial telematics
- GPS Tracker
01-2024
- Modem compatibility list updated in Wiki section
- Modem SIM detection pin added in Wiki section
- Modem troubleshooting guide added in Wiki section
- Modem configuration steps added in Wiki section
- PCB-Design Data for OC2321 and OC2322 added.
When starting to evaluate Infineons OPTIGA™ Connect IoT solution as a proposal you might want to follow these steps:
- Download the DataSheet
- Order the OPTIGA™ Connect IoT SAMPLE KIT
- In case you don't have a dedicated
Deviceyet, get our OPTIGA™ Connect IoT Evaluation Board - Buy a miniPCIe modem of your choice and a LTE antenna. Ensure that the modem is capable to handle eUICCs!
- If you don't want to solder the VQFN8 package or work with Smart Card readers consider getting our Card Adapter VQFN8 version
- In case you need adapter that fit in SIM sockets in combination with the Card Adapter VQFN8 we offer a SIM Cable Adapter Kit
- Download the Quickstarter Guide
The kit comes with 5 pcs of OPTIGA™ Connect IoT with predefined dataplan working out of the box for instant trials.
- 5 pcs VQFN-8/MFF2
- 70 MB of connectivity (*)
- 6 month validity from first network connect on
- 150 countries worldwide coverage (Americas, APAC and EMEA)
(*) For all eSIMs included in the Kit, a combined total of 70 MB is available.
Enables customer to verify/operate OPTIGA™ Connect IoT in combination with a cellular modem available as mini PCIe form factor
- LTE modem shield only
- Incl. OPTIGA™ Connect IoT VQFN-8 soldered to the board
- 3FF/Micro-SIM card holder
- Switch between SIM/eSIM
- Connects to host via 40-pin Raspberry Pi header or Micro-USB
- Optional: Footprint to add OPTIGA™ Trust X/M
In this configuration the card adapter is assembled with a
- VQFN-8 Zero Force Insertion (ZIF) test socket
- Jumper and test pins
Add-on for Card Adapter V3.x
Enables a connection from an OPTIGA™ Connect IoT inserted in the ZIF-socket to a 2FF, 3FF or 4FF SIM card holder
The kit includes 5 variants of SIM adapters to be attached to Card Adapter V3.x via its female 8-pin header
You get:
- Mini-SIM (2FF, 0 deg)
- Mini-SIM (2FF, 90 deg)
- Micro-SIM (3FF, 0 deg)
- Micro-SIM (3FF, 180 deg)
- Nano-SIM (4FF, 0 deg)
Note: The RJ45 and SMB coax cable are not relevant for eSIM
For the Datasheet, Product Brief and a Quickstarter Guide please visit our OPTIGA™ Connect IoT product website
Here the direct links to
For reporting technical issues or proposing new features, please create a new issue.
Before considering submitting a new issue please check out the OPTIGA™ Connect IoT - Wiki
When submitting a new issue please be aware that OPTIGA™ Connect IoT is a solution with four major categories and 2 partners involved.
Fig.: OPTIGA™ Connect IoT - Solution Architecture
Therefore please help us by linking your issues to these four major categories:
- Hardware
- Package
- Software
- Connectivity
Read more in the Contributing Guide