Inteform/esp32-lora-library

Issues

• if(version == 0x12) is not met at all, what is this version refers to ?

  #28 opened 4 months ago by Tatbiq-Tech
  0

• Sometimes device stuck in while ((lora_read_reg(REG_IRQ_FLAGS) & IRQ_TX_DONE_MASK) == 0)

  #26 opened a year ago by krupis
  2

• LoRa sender not working

  #13 opened 5 years ago by lucas-figueiredo-m
  4

• Is this dead ?

  #24 opened 2 years ago by arslanmughal99
  3

• Implementing LoRaWAN

  #22 opened 2 years ago by MichaelKeyser
  2

• Does not work on the newer versions of ESP-IDF had to go back to 3.3.2

  #18 opened 4 years ago by ambassallo
  7

• Watchdog timeout on lora_receive_packet

  #21 opened 3 years ago by bkgoodman
  0

• aes

  #20 opened 3 years ago by jigsurfer
  1

• License

  #17 opened 4 years ago by akiyeng2
  0

• Unable to configure Heltec ESP32 Lora

  #14 opened 5 years ago by jemo07
  1

• sender not working with a dpread factor of 12

  #16 opened 5 years ago by skypap
  0

• Not working as Sender with Helteck wireless stick lite

  #15 opened 5 years ago by ahmedwahdan
  0

• Test on Heltec WiFi OLED Lora V2

  #12 opened 5 years ago by lordbarba
  0

• CAD MODE

  #11 opened 6 years ago by childswong
  0

• Use as git submodule

  #10 opened 6 years ago by leon-v
  0

• Example code does not compile

  #9 opened 6 years ago by Nyan256
  2

• Bug in lora.c

  #6 opened 6 years ago by COM8
  1

• Deep sleep issue

  #5 opened 6 years ago by iho77
  4

• Check for value of version register fails after lora_reset (in lora_init).

  #2 opened 6 years ago by vijaygill
  4

• Not thread-safe

  #4 opened 6 years ago by bruabas
  0

• LORAWAN

  #1 opened 6 years ago by genoinosonda
  1