These files allow quick configuration of the ODIN-W2 and ZED-F9P RTK receivers on the C099-F9P for WIFI peer to peer base and rover operation.
https://www.u-blox.com/en/product/c099-f9p-application-board
- Base ODIN-W2 Station UDP client.txt
- Rover ODIN-W2 Access Point UDP Server.txt
u-blox Connectivity Software 5.01/6.0.1 for ODIN-W2 u-blox s-center evaluation software for download of ODIN configuration files C099-F9P-AppBoard-ODIN-W2-CSW_UserGuide_(UBX-18055649).pdf
https://www.u-blox.com/en/product/s-center
The C099-F9P enables two units to operate as a base and rover pair using the u-blox Connectivity Software 5.01/6.0.1 for ODIN-W2. This uses WIFI peer to peer data transfer.
The ODIN configuration txt files must be downloaded using s-center as detailed in C099-F9P-AppBoard-ODIN-W2-CSW_UserGuide_(UBX-18055649).
- F9P Base config C99.txt
- F9P Base Survey in disable.txt - (a cold start must be sent after this)
- F9P Base Survey in start.txt
- F9P Rover config C99.txt
- F9H Rover config C99.txt
- F9P Base moving base config C99.txt
- C99 quick configuration.pdf
- C99 quick configuration Moving Base.pdf
Not compatible with u-center legacy configuration file download. You must use new u-center, View/Generation 9 Configuration View/Advanced configuration - Load and Send buttons. Return ZED-F9P to default configuration first before configuration file download.
ZED-F9P HPG1.00 firmware (supplied on the C099-F9P until end of December 2018) ZED-F9P HPG1.10 firmware for moving baseline operation (supplied on the C099-F9P after December 2018) u-blox u-center evaluation software V18.11
https://www.u-blox.com/en/product/u-center
Copyright (C) u-blox AG
u-blox reserves all rights in this deliverable (documentation, software, etc.,).