ROS 2 Interfaces

The zed-ros2-interfaces repository install the zed_interfaces ROS2 package which defines the custom topics, services and actions used by the ZED ROS2 Wrapper to interface with ROS2.

If you already installed the ZED ROS2 Wrapper or you plan to install it on this machine, this package is not required because it is automatically integrated by zed-ros2-wrapper as a git submodule to satisfy all the required dependencies.

You must instead install this package on a remote system that must retrieve the topics sent by the ZED Wrapper (e.g. the list of detected objects obtained with the Object Detection module) or call services and actions to control the status of the ZED Wrapper.

Note: this package does not require CUDA, hence it can be used to receive the ZED data also on machines not equipped with an Nvidia GPU.

Prerequisites

Ubuntu 20.04
- ROS2 Foxy
Ubuntu 22.04
- ROS2 Humble

Build the repository

The zed_interfaces is a colcon package. It depends on the following ROS packages:

ament_cmake
builtin_interfaces
std_msgs
geometry_msgs
rosidl_default_generators
rosidl_default_runtime
rosidl_interface_packages

Open a terminal, clone the repository, update the dependencies and build the packages:

cd ~/catkin_ws/src
git clone https://github.com/stereolabs/zed-ros2-interfaces.git
cd ../
sudo apt update
rosdep update
rosdep install --from-paths src --ignore-src -r -y
colcon build --symlink-install --cmake-args=-DCMAKE_BUILD_TYPE=Release
echo source $(pwd)/install/local_setup.bash >> ~/.bashrc
source ~/.bashrc

Note: If rosdep is missing you can install it with:

$ sudo apt-get install python-rosdep python-rosinstall-generator python-vcstool python-rosinstall build-essential

'Note': The option --symlink-install is important, it allows using symlinks instead of copying files to the ROS2 folders during the installation, where possible. Each package in ROS2 must be installed and all the files used by the nodes must be copied into the installation folders. Using symlinks allows you to modify them in your workspace, reflecting the modification during the next executions without the needing to issue a new colcon build command. This is true only for all the files that don't need to be compiled (Python scripts, configurations, etc.).

Note: If you are using a different console interface like zsh, you have to change the source command as follows: echo source $(pwd)/install/local_setup.zsh >> ~/.zshrc and source ~/.zshrc.

Custom Topics

BoundingBox2Df
BoundingBox2Di
BoundingBox3D
Keypoint2Df
Keypoint2Di
Keypoint3D
Object
ObjectsStamped
Skeleton2D
Skeleton3D

You can get more information by reading the Stereolabs online documentation

Custom Services