GRiDemulator: A C repository from JDat

GRid Compass and Compass II emulator. Models:

1100
1101 (have ROM)
1109
1121
1128-VP
1129
1131
1139 (have ROM)

Based on XTulator project by mikechambers84.

https://github.com/mikechambers84/XTulator

Some ideas come from MAME emulator's GRiD implementation by usernameak.

And big thanks to usernameak personally for his research and consulting

http://deltacxx.insomnia247.nl/gridcompass/

This is early stage.
Added CMake system from https://github.com/user890104/XTulator
For now ROM is running up to stage where it tries to boot from GPIB or bubble memory. This is normal in current stage.
Lot of work to do.
Don't complain about functionality in this early stage.

Sorry, Windows support and PC XT hardware removed from original code.

Compiling from source under Linux

sudo apt-get install libsdl2-dev libpcap-dev cmake

mkdir build && cd build && cmake .. && make

Running under Linux

Make shure you have boot ROMs in ROM directory

./gridemu -machine 1101

./gridemu -machine 1139

./gridemu -machine 1101 -debug detail

./gridemu -machine 1101 -debug detail 2> test.log

Original readme from XTulator author:

XTulator - A portable, open source (GPLv2) 80186 PC emulator

About

XTulator is an x86 PC emulator that is designed to run software that was written for Intel processors up to the 80186. It's able to run MS-DOS, FreeDOS, Windows 3.0, and many games of the era. It supports graphics up to the EGA/VGA standard, and emulates the Sound Blaster 2.0 as well as Adlib/OPL2 (using Nuked OPL). It also emulates peripherals like the standard Microsoft-compatible serial mouse and a serial modem, which can simulate phone line connections via TCP. An NE2000 Ethernet adapter is also emulated using pcap.

This is actually a rewrite of an emulator I wrote many years ago. It was poorly implemented, even though it worked fairly well. It had many hacks and a poor architecture, but most old 80186 software could still run under it. I've just never quite been happy with it, so I am writing this new emulator to be more sanely coded, and more accurate. I'm aiming to create a much more modular architecture this time around and avoid the design flaws which turned the old code into a mess.

Re-write goals

More sane architecture in general
Minimize (preferably eliminate) use of shared globals
Implement a sort of generic "virtual ISA card" interface
Keep CPU and other modules as independent of each other as possible
Improve accuracy of chipset and components emulation
Maintain host platform-independence
Implement proper hard drive and floppy disk controller interfaces, rather than "cheating" with HLE like before

Current status

WARNING: This software is still currently in the early stages, and not really ready for general use. If you enjoy testing experimental new software, this is for you!

Checkmarks below mean that feature is implemented enough to boot and run things with the "generic_xt" machine definition. See comments below for details.