In this project, a first version of a digital camera was design and developed.
Components used in this project are:
-
STM32F4 Discovery Board
-
OV7670 Image sensor Module
-
3.2inch ili9431 16Bits Display
-
Final Project Setup
-
Results
For this project to work with the STM32F407 discovery board, a configuration was made on the board by performing tight soldering using flying wires to connect ST-LINK/V2-A virtual COM port (ST-LINK VCP on U2 pin 12 and 13) to STM32F407 USART2 (PA2 and PA3: P1 pin 14 and 13) as shown below
1.STM32F4 Discovery Board
2. OV7670 Image sensor Module
3. 3.2inch ili9431 16Bits Display