JTippetts/U3DTerrainEditor

After 0 or chars Terrain Spacing value do not apply changes

sosnoed opened this issue · 0 comments

sosnoed commented
  1. After 0 or chars Terrain Spacing value do not apply changes

Description: If apply 0 or any incorrectly value to “Terrain Spacing” then other values cannot be applied to Terrain Spacing until restart editor

image

System info: resolution – 1920x1080, borderless mode
Repro steps:

  1. Set “Terrain Spacing” to 0 or ‘test123’ value
  2. Try to set any correctly value to “Terrain Spacing” (“1” for example)
    Expected: Value can be changed after set 0
    Priority: low