Jalle19/eda-modbus-bridge

Issues

• Holding registers 3x0051 and 3x0052

  #112 opened 9 months ago by pkuronen22
  11

• Add Defrosting switch from coil address 1x0055?

  #109 opened a year ago by c-mholm
  7

• Will it work with software v. 5.62?

  #107 opened a year ago by juuko2
  12

• Add support for 3x0001, 3x0003 and 3x0004 holding registers

  #96 opened a year ago by Ta802
  10

• Update README regarding boolean/integer settings

  #103 opened a year ago by Jalle19
  0

• Make "eco" mode optional based on firmware version

  #104 opened a year ago by Jalle19
  5

• Startup fails reading coil 51

  #105 opened a year ago by ssalmela
  17

• Replace async-mqtt with mqtt.js 5.x

  #95 opened a year ago by Jalle19
  0

• Illegal data address 72

  #100 opened a year ago by mhog79
  7

• Change MQTT auto-discovery log level to debug

  #93 opened a year ago by Jalle19
  0

• Add support for changing Jäähdytys/Lämmitys/LTO settings

  #98 opened a year ago by Jalle19
  0

• Unit type read incorrectly (always "Family")

  #89 opened a year ago by Jalle19
  0

• missing sensor data with Pelican HP eAir?

  #88 opened a year ago by juntta
  14

• Modbus TCP/IP connection possible?

  #86 opened a year ago by juntta
  6

• Fine-tune support for older Pingvin units

  #83 opened a year ago by Jalle19
  0

• Installation fails with npm ERR! code 1

  #77 opened a year ago by ctekn002xamk
  2

• Adapt to recent entity naming changes in Home Assistant

  #66 opened a year ago by Jalle19
  5

• Automatic reconnect to MQTT not working during startup

  #61 opened 2 years ago by Jalle19
  0

• Is it possible to set Eco Mode on?

  #58 opened 2 years ago by kailampi
  19

• ventilationLevelTarget/set

  #53 opened 2 years ago by Harri-V
  1

• Repeated alerts after enabling this bridge

  #56 opened 2 years ago by odelma
  10

• Compatibility with Pingvin 120 ECE

  #57 opened 2 years ago by nhallfast
  6

• Different publish intervals for different information

  #43 opened 3 years ago by Jalle19
  8

• Add a "master alarm" entity

  #48 opened 3 years ago by Jalle19
  4

• Expose device state

  #46 opened 3 years ago by Jalle19
  2

• Reading-label errors

  #45 opened 3 years ago by JohanElmis
  6

• Alarm names and descriptions

  #42 opened 3 years ago by JohanElmis
  7

• Try to reconnect to MQTT broker if disconnected

  #36 opened 3 years ago by Jalle19
  9

• issue with nodejs 12.22.5

  #38 opened 3 years ago by Sebastian930
  7

• Add support for alarms

  #31 opened 3 years ago by tomrosenback
  2

• Publish only changed settings or modes in MQTT callback

  #33 opened 3 years ago by tomrosenback
  4

• Discovery messages should be retained

  #29 opened 3 years ago by tomrosenback
  3

• Add a basic test suite

  #27 opened 3 years ago by Jalle19
  1

• Bump version

  #24 opened 3 years ago by tomrosenback
  0

• Cleanup Home Assistant specific remains

  #23 opened 3 years ago by tomrosenback
  1

• Expose device information over MQTT as well

  #19 opened 3 years ago by Jalle19
  5

• Add authentication to MQTT client

  #18 opened 3 years ago by tomrosenback
  2

• Make HTTP service optional

  #17 opened 3 years ago by tomrosenback
  5

• Make Home Assistant auto-discovery optional (for standalone setups)

  #13 opened 3 years ago by Jalle19
  0

• Update the README once MQTT support is stabilized

  #15 opened 3 years ago by Jalle19
  0

• Improve device identifier

  #14 opened 3 years ago by Jalle19
  0

• Add support for Home Assistant MQTT discovery

  #6 opened 3 years ago by Jalle19
  3

• Family type reported incorrectly

  #10 opened 3 years ago by tomrosenback
  4

• Remove "ventilation target level" setting

  #5 opened 3 years ago by Jalle19
  0

• Add support for controlling away/long away/overpressure settings

  #7 opened 3 years ago by Jalle19
  0