Open Lighting Architecture Container
This Dockerfile builds Open Lighting Architecture from scratch on top of Alpine Linux 3.5.
The following plugins are available:
- Dummy
- ArtNet
- ShowNet
- ESP Net
- Serial USB
- Enttec Open DMX
- SandNet
- StageProfi
- Pathport
- E1.31 (sACN)
- USB
- FTDI USB DMX
- OSC
- SPI
- KiNET
- KarateLight
- Milford Instruments
- Renard
- UART native DMX
- Open Pixel Control
- GPIO
Usage
The easiest way to provide proper connectivity is to use the host network.
docker run -it --net host jankoppe/openlightingarchitecture
Otherwise you will probably want to expose Port 9090 and 9010, whereas the webinterface is available via HTTP on Port 9090.
FTDI USB DMX
To use the dumb FTDI USB DMX adapters (which are extremely cheap) the container needs more privileges to directly communicate with the ftdi chip using libftdi.
docker run -it --net host --privileged --device /dev/ttyUSB0 jankoppe/openlightingarchitecture