PN5180 ESP32 Updater

This project can update the firmware of the PN5180 using a ESP32.

How to use

  1. Set the *_PIN to the GPIO pins matching your connection to the PN5180.
  2. Execute the script on your ESP32.
  3. First the script will prompt you to enter any key to print current firmware information. If that does not work, please check the *_PIN-Settings.
  4. After displaying the information you will be prompted again to enter any key to proceed with the firmware update itself.
  5. At the end you will be prompted again to enter any key to print the firmware version information again to verify the new firmware is not on the PN5180.

Based on:

Many thanks and all copyrights remain to: https://github.com/abidxraihan/PN5180_Updater_ESP32 https://github.com/zGrEaNz/PN5180_Updater

PLEASE USE WITH CARE, I AM NOT RESPONSIBLE FOR ANY DAMAGES!