Description: When you press SW3, the LEDs will act as a binary counter and the P18 will be low. When you press SW2, the LEDs will blink simultaneously and the P18 will be high. -------------------------------------------------------------------------------------------- PIN MUX CONFIGURATION: pin64: RED LED pin1: YELLOW LED pin2: GREEN LED pin4: SW3 pin15: SW2 pin18: P18 on P2 header -------------------------------------------------------------------------------------------- Usage: 1. Add main.c, pin_mux_config.h, and pin_mux_config.c in your project in Code Composer Studio 2. Check gpio_if.c and uart_if.c are in your project in the project manager