This repository contains some useful files that allow you to use a Raspberry PI using a readonly filesystem. After running install.sh everything will be set up and the system will reboot into read-only mode.
See instructions below to see how to switch to permanent or temporary write-mode.
This script is tested with a freshly deployed Raspbian image with "desktop and recommended software", specifically with the img file dated 2018-11-13, kernel 4.14. (Tested on a Rpi 3B+). It has also been tested on a recent Rasbian image (Buster) on a Rpi 4B and a Rpi Zero W.
This files contains some ideas and code of the following projects:
- https://github.com/josepsanzcamp/root-ro
- https://gist.github.com/niun/34c945d70753fc9e2cc7
- https://github.com/chesty/overlayroot
- Random-seed contribution by texahic
Congratulate the original authors if these files work as expected.
There can be many reasons to configure a read only root filesystem. In my case I use it on Raspberry Pi's which are used for narrowcasting, kiosk installations and dashboard applications. I have the read-only filesystem enabled for three reasons:
- Extend microSD card lifespan.
- Make sure the filesystem isn't corrupted by random power cut shut downs (the Rpi's get their power from USB ports on flatscreen TV's).
- Undo any user changes and fix any user-induced errors by simply rebooting the Raspberry Pi.
The script uses an overlay filesystem. Basically the normal root storage device gets mounted in readonly bottom layer. A writable in-memory layer is configured on top of it. Any changes made will be written to the top layer and will not be written to the I/O device. There are two options to go back to write mode.
- The bottom layer can be remounted in readwrite mode, chroot to the mount point of the bottom layer and make changes there.
- Use the provided script in /root to disable or enable the overlayfs altogether after a reboot.
Read more about the overlay filesystem here: https://wiki.archlinux.org/index.php/Overlay_filesystem
To get everything configured and to enable the read-only filesystem, you can simply paste these commands.
sudo apt-get -y install git
cd /home/pi
git clone https://github.com/JasperE84/root-ro.git
cd root-ro
chmod +x install.sh
sudo ./install.sh
The install.sh script will configure and request to reboot the system.
Execute:
sudo /root/reboot-to-writable-mode.sh
Execute:
sudo /root/reboot-to-readonly-mode.sh
Write access can be enabled using following command.
sudo mount -o remount,rw /mnt/root-ro
# next command enables DNS in chroot because resolvconf service needs to read /run/resolvconf/resolv.conf
sudo mount -o bind /run /mnt/root-ro/run
sudo chroot /mnt/root-ro
Exit the chroot and re-mounting the filesystem:
exit
sudo mount -o remount,ro /mnt/root-ro
To return to the original state to allow easy apt-get update/upgrade and rpi-update, you need to add a comment mark to the "initramfs init.gz" line to the /boot/config.txt file.
Released under MIT by @JasperE84.
This project has been partly developed in time donated by Contour - Sheet metal supplier
Dit project is deels ontwikkeld ontwikkeld in de tijd van Contour - Plaatwerkleverancier