Jayd52010's Stars
vrublack/WT901BLECL
Android app for the WT901BLECL Sensor (Wit Motion)
Nordln/upsplusv5-battery-logger
Logs uptime, mV, batt mA, Batt T, Pi mW and battery% from the GeeekPi UPSv5 (EP-0136) board to csv and optionally graphs the data
geeekpi/upsplus
UPS Plus is a new generation of UPS power management module. It is an improved version of the original UPS prototype. It has been fixed the bug that UPS could not charge and automatically power off during work time. It can not only perform good battery power management, but also provide stable voltage output and RTC functions. At the same time,it support for FCP, AFC, SFCP fast charge protocol, support BC1.2 charging protocol, support battery terminal current/voltage monitoring and support two-way monitoring of charge and discharge. It can provide programmable PVD function. Power Voltage Detector (PVD) can be used to detect if batteries voltage is below or above configured voltage. Once this function has been enabled, it will monitoring your batteries voltage, and you can control whether or not shut down Raspberry Pi via simple bash script or python script. This function will protect your batteries from damage caused by excessive discharge. It can provide Adjustable data sampling Rate. This function allows you to adjust the data sampling rate so that you can get more detailed battery information and also it will consume some power. The data sampling information can communicate with the upper computer device through the I2C protocol. UPS Plus supports the OTA firmware upgrade function. Once there is a new firmware update, it is very convenient for you to upgrade firmware for UPS Plus. The firmware upgrade can be completed only by connecting to the Internet,and execute a python script. Support battery temperature monitoring and power-down memory function. UPS Plus can be set to automatically start the Raspberry Pi after the external power comes on. The programmable shutdown and forced restart function will provide you with a remote power-off restart management method. That means you don’t need to go Unplug the power cable or press the power button to cut off the power again. You can set the program to disconnect the power supply after a few seconds after the Raspberry Pi is shut down properly. And you can also reconnect the power supply after a forced power failure to achieve a remote power-off and restart operation. Once it was setting up, you don't need to press power button to boot up your device which is very suitable for smart home application scenarios.
fr3ts0n/AndrOBD-Plugin
AndrOBD plugin development project
fr3ts0n/AndrOBD
Android OBD diagnostics with any ELM327 adapter
DonAnonymousio/Marauder-for-ST7789
These are working files for any ESP32 WROOM + TFT 2.8 inch ST7789.
chiteroman/PlayIntegrityFix
Fix Play Integrity (and SafetyNet) verdicts.
gboduljak/Android-ToolkitV2
Android Toolkit is an app for an Android device managment and modification. It has built in ADB Tools, Fastboot Tools and custom recovery flasher and much more. There is also support for remote ADB control. Version V2 is being written in MVVM for perfomance, architecture and code improvement .
Lyoncore/ubuntu-custom-recovery
The Ubuntu recovery repository
Bhav06/recovery-builder
Android Custom Recovery Builder By Github Action Workflows
Magisk-Modules-Alt-Repo/magic-flash
An android CLI flash tool without custom recoveries
Fox2Code/FoxMagiskModuleManager
A module manager for Magisk because the official app dropped support for it
magiskmodule/Godspeed-Magisk-Module
Download Godspeed Gaming Module Latest Version 2023
magiskmodule/Stratosphere-Performance
Stratosphere Performance Gaming Magisk Module
White9shadow/Gamwing
best gaming magisk module
ahkehra/GameUnlocker
This Magisk module Unlock Max Game "Graphics/FPS" Mode
sionta/gim-tweaks
🎮 Magisk module all-in-one tweak for gaming experience.
rithvikvibhu/nh-magisk-wifi-firmware
This Magisk module adds the required firmware for external wireless adapters to be used with NetHunter.
johanlike/DJY-Nethunter-Magisk-Modules
适用于所有Android版本的无线固件和应用程序应用程序Nethunter安装模块（Wireless firmware and App application Nethunter installation module for all Android versions）
Kingsman44/Pixelify
Magisk module to enables pixel exclusive features and ui
Androidacy/MagiskModuleManager
Previously known as Fox's Magisk Module Manager (FoxMMM), this app helps users find, install "Magisk Modules" - powerful little zips/apps for your device that plug into the Magisk framework.
LeanxModulostk/UnityFix
Unity app incorrectly sets cpu affinity to max capacity cores. Setup the library name and mask to always report the same max cpu freq to the tasks.
Magisk-Modules-Alt-Repo/chroot-distro
install linux distributions on android
treehouses/remote
⚡ control Raspberry Pi from Android Device through Bluetooth ⚡
ventoy/Ventoy
A new bootable USB solution.
strandjs/IntroLabs
These are the labs for my Intro class. Yes, this is public. Yes, this is intentional.
AdarshAddee/root
Root - Access root previliges in termux without rooting android device
topjohnwu/Magisk
The Magic Mask for Android
termux/proot-distro
An utility for managing installations of the Linux distributions in Termux.
HimDek/install-kali-Linux-GUI-Desktop-in-Android-using-Termux
This Guide will help you install Kali Linux in Android, that too with a GUI Desktop Environment within Android. It uses Termux to run Kali Linux in Android with XFCE4 Desktop Environment and a Tight VNC Server, which we connect to using a VNC Viewer app in Android.