Pinned Repositories
24GHz-Radar-for-Arduino
This repository contains software for Infineon's 24GHz Radar boards for Arduino.
3D-MIMO-SAR_Imaging
5G-air-simulator
An open-source system-level simulator modeling the 5G air interface
5g-nr-ldpc
A 3GPP 5G NR compliant LDPC library.
5G-NR-LTE-Sidelink-Capacity-Estimator
This tool computes the expected link capacity in data rate (Mbit/s) for sidelink considering 5G New Radio (NR) and Long Term Evolution (LTE) communication standards, as defined by The 3rd Generation Partnership Project (3GPP). Users can input the respective configuration parameters and evaluate the resulting capacity.
802.11-LinkSimulation
Link simulation of 802.11a, 802.11n and 802.11ac.
802.11-SystemSimulation
System Simulation of IEEE 802.11
GPS_Baseband
https://caravel-user-project.readthedocs.io
gr-wifi-ofdm
An ieee 802.11a Physical Layer Prototype on Gnuradio & USRP
tinySA
tiny Spectrum Analyzer
JimChowTiger's Repositories
JimChowTiger/Agora
JimChowTiger/arty-expansion-board
IO expansion board compatible with Digilent Arty A7
JimChowTiger/c-mesh-api
Wirepas's Dual MCU API to interface locally with a node device
JimChowTiger/CatSniffer
CatSniffer is an original multiprotocol, and multiband board made for sniffing, communicating, and attacking IoT (Internet of Things) devices. It was designed as a highly portable USB stick that integrates the new chips TI CC1352, Semtech SX1262, and Microchip SAMD21E17.
JimChowTiger/cusignal
cuSignal - RAPIDS Signal Processing Library
JimChowTiger/DECT-2020-NR-Simulation
DECT-2020 New Radio (NR) Link-Level Simulation Environment
JimChowTiger/ESPAsyncWebServer
Async Web Server for ESP8266 and ESP32
JimChowTiger/EvilCrowRF_Custom_Firmware_CC1101_FlipperZero
This firmware is an alternative to the EvilCrowRF default firmware. Module: CC1101 - Compatible Flipper Zero file.
JimChowTiger/flipperzero-smartwares
Subghz files for Smartwares RF devices
JimChowTiger/gateway
Wirepas's Linux gateway reference implementation built on top of Wirepas's dual mcu api and Wirepas' gateway to backend api
JimChowTiger/gps-cheat
GPS Spoofing
JimChowTiger/gps-sdr-sim
Software-Defined GPS Signal Simulator
JimChowTiger/gr-dvbs2acm
DVB-S2 ACM blocks for GNU Radio
JimChowTiger/humanrf
Official code for "HumanRF: High-Fidelity Neural Radiance Fields for Humans in Motion"
JimChowTiger/IQEngine
www.iqengine.org
JimChowTiger/LibreCAL
4 port eCal module
JimChowTiger/LimeSDR-XTRX
JimChowTiger/LTESniffer
An Open-source LTE Downlink/Uplink Eavesdropper
JimChowTiger/mlib_devel-1
JimChowTiger/PassiveRadarSim
Project for Radar Signal Processing - Passive Radar Simulation from RTL-SDR FM Data
JimChowTiger/pi-rotator
The GS-232 costs far too much, so here's a simple Pi based antenna rotator
JimChowTiger/PocketSDR
JimChowTiger/protocentral_healthypi_5
Hardware and software for the ProtoCentral HealthyPi 5
JimChowTiger/satelliteHunter
the source code (arduino) for the device. which allows you to point an amateur antenna at amateur satellites
JimChowTiger/SigMF
The Signal Metadata Format Specification
JimChowTiger/Space-Debugger
JimChowTiger/stable-diffusion-webui
Stable Diffusion web UI
JimChowTiger/verilog-axi
Verilog AXI components for FPGA implementation
JimChowTiger/verilog-ethernet
Verilog Ethernet components for FPGA implementation
JimChowTiger/Willy_Firmware_CC1101_ESP32_Display_Touchscreen
Willy Firmware is an alternative to Flipper Zero. | Board: ESP32 T-Display-S3 - Module: CC1101 - Display: Touchscreen - Compatible Flipper Zero file.