This script takes out some of the hassle when installing DKAN2.
To run the script do:
sudo chmod 777 dkan2-installation.sh
sudo ./dkan2-installation.sh {username}
e.g
sudo ./dkan2-installation.sh nathan
It performs the following functions:
- installs Docker and Docker Composer
- installs dktl
- stark Docker Containers
There are some things you will need to do:
Open up /etc/hosts, vim /etc/hosts. You will see something like:
127.0.0.1 localhost
127.0.1.1 nathan-OptiPlex-9020
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
You will need to add 127.0.0.{x} dkan to the file, like so:
127.0.0.1 localhost
127.0.1.1 nathan-OptiPlex-9020
127.0.0.2 dkan
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
{x} can be any value (between 0 and 255), so long as the ip does not conflict.
Make sure that nothing is running on port 80, 32781, 32780, 32779, 32776, 32775