Introduction

The deCONZ Basic APS Plugin demonstrates how to use the deCONZ C++ API to send and receive ZigBee APS frames.

The plugin runs a simple state machine which continuously searches the network for ZigBee Light Link devices (profile-id 0xC05E) wich provide a on/off cluster (cluster-id 0x0006). This is done by broadcasting a ZigBee ZDP match descriptor request.

If any responses are received they will be printed in the console.

Installation

Supported platforms

Raspbian Jessie
Raspbian Stretch

Raspbian Wheezy and Qt4 is no longer maintained.

Install deCONZ

Important If you're updateing from a previous version always make sure to create an backup in the Phoscon App and read the changelog first.

Download deCONZ package

 wget http://www.dresden-elektronik.de/rpi/deconz/beta/deconz-latest-beta.deb

Install deCONZ package
```
 sudo dpkg -i deconz-latest-beta.deb
```

Important this step might print some errors that's ok and will be fixed in the next step.

Install missing dependencies
```
 sudo apt update
 sudo apt install -f
```

Install deCONZ development package

Download deCONZ development package

 wget http://www.dresden-elektronik.de/rpi/deconz-dev/deconz-dev-latest.deb

Install deCONZ development package
```
 sudo dpkg -i deconz-dev-latest.deb
```
Install missing dependencies
```
 sudo apt update
 sudo apt install -f
```

Get and compile the plugin

Checkout the repository

 git clone https://github.com/dresden-elektronik/basic-aps-plugin.git

Compile the plugin

 cd basic-aps-plugin
 qmake && make -j2

Note On Raspberry Pi 1 use qmake && make

Replace original plugin

 sudo cp ../libbasic_aps_plugin.so /usr/share/deCONZ/plugins

Running

Start deCONZ from commandline with enabled debug output.

deCONZ --dbg-info=1

Console Output

send match descriptor request (id: 181)
....
received match descriptor response (id: 181) from 0x00212effff0059c5
         match descriptor endpoint: 0x0A

Headless support

The beta version contains a systemd script, which allows deCONZ to run without a X11 server.

Note The service does not yet support deCONZ updates via WebApp, therefore these must be installed manually. A further systemd script will handle updates in future versions.

Enable the service at boot time

$ sudo systemctl enable deconz

Disable deCONZ GUI Autostart

The dresden elektronik Raspbian sd-card image autostarts deCONZ GUI.

$ sudo systemctl disable deconz-gui
$ sudo systemctl stop deconz-gui

On older versions of deCONZ this can be done by removing the X11 Autostart file.

$ rm -f /home/pi/.config/autostart/deCONZ.desktop

Software requirements

Raspbian Jessie or Raspbian Stretch with Qt5

Important The serial port must be configured as follows to allow communication with the RaspBee.

$ sudo raspi-config

() Interfacting Options > Serial

    * Would you like a login shell accessible over serial?
      > No
    * Would you like the serial port hardware to be enabled?
      > Yes

After changing the settings reboot the Raspberry Pi.

Hardware requirements

Raspberry Pi 1, 2 or 3
RaspBee ZigBee Shield for Raspberry Pi
ConBee USB dongle for Raspberry Pi and PC

3rd party libraries

The following libraries are used by the plugin:

License

The plugin is available as open source and licensed under the BSD (3-Clause) license.

JnTournier/basic-aps-plugin