JohnAtl/pcbgcode

Issues

• Spot drill holes use drill depth instead of using Depth defined on Generation Option screen in etch file

  #25 opened 3 months ago by D-e-e-p-a-k-S-h-a-r-m-a
  0

• Milling board outline with rounded corners

  #19 opened 2 years ago by deHarro
  5

• GCode output starts missing paths when the path touches the board edges

  #24 opened 5 months ago by SteveEggo-SpecialAgent
  0

• Using PCB-Gcode in Fusion 360?

  #10 opened 2 years ago by TSJim
  2

• sporadically erratic sorting of etching pathes on double sided boards

  #23 opened 2 years ago by deHarro
  1

• different depth for milling holes and circumference, respectively

  #20 opened 2 years ago by deHarro
  1

• When generating drill file, first drill OK. Remaing drills use "Spot Drill" depth?

  #9 opened 2 years ago by mprowe
  5

• Milling the board outline performs "climbing"

  #18 opened 2 years ago by deHarro
  0

• Don't generate files that are not selected as wanted

  #17 opened 2 years ago by deHarro
  0

• Preview doesn't start, get error messages instead

  #15 opened 2 years ago by deHarro
  2

• Compatibility of pcb-gecode with EAGLE version

  #16 opened 2 years ago by deHarro
  0

• Milling the board outline, take 2

  #14 opened 2 years ago by deHarro
  1

• Milling with 3 bits

  #2 opened 6 years ago by MARIOBASZ
  2

• Milling the board outline

  #13 opened 2 years ago by deHarro
  2

• Use small endmill to mill holes of various sizes

  #1 opened 6 years ago by JohnAtl
  2

• corrections and addtions to pcb-gcode

  #8 opened 2 years ago by deHarro
  8

• Does PCB-GCode Work with Latest Eagle Version on Mac?

  #4 opened 2 years ago by TSJim
  1

• Document links to online groups outdated, bump version number.

  #6 opened 2 years ago by JohnAtl
  0

• Images for pcb-gcode-setup aren't found, causing window to be larger than screen.

  #5 opened 2 years ago by JohnAtl
  1

• Mismatch between ULP and settings files versions - won't run

  #3 opened 2 years ago by howiemnet
  2