/sequitur-g2p

This is a github repository of the abandonware Sequitur G2P by Bisani & Ney

Primary LanguagePythonGNU General Public License v2.0GPL-2.0

Build Status Sequitur G2P

A trainable Grapheme-to-Phoneme converter.

Introduction

Sequitur G2P is a data-driven grapheme-to-phoneme converter written at RWTH Aachen University by Maximilian Bisani.

The method used in this software is described in

   M. Bisani and H. Ney: "Joint-Sequence Models for Grapheme-to-Phoneme
   Conversion". Speech Communication, Volume 50, Issue 5, May 2008,
   Pages 434-451

   (available online at http://dx.doi.org/10.1016/j.specom.2008.01.002)

This software is made available to you under terms of the GNU Public License. It can be used for experimentation and as part of other free software projects. For details see the licensing terms below.

If you publish about work that involves the use of this software, please cite the above paper. (You should feel obliged to do so by rules of good scientific conduct.)

The original README contains also these lines: You may contact the author with any questions or comments via e-mail: maximilian.bisani@rwth-aachen.de. For questions regarding current releases of Sequitur G2P contact Pavel Golik (golik@cs.rwth-aachen.de). but we are not sure how active they are. If needed, feel free to create an issue on https://github.com/sequitur-g2p/sequitur-g2p. We will try to help.

License

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License Version 2 (June 1991) as published by the Free Software Foundation.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, you will find it at http://www.gnu.org/licenses/gpl.html, or write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA.

Should a provision of no. 9 and 10 of the GNU General Public License be invalid or become invalid, a valid provision is deemed to have been agreed upon which comes closest to what the parties intended commercially. In any case guarantee/warranty shall be limited to gross negligent actions or intended actions or fraudulent concealment.

Installing

To build and use this software you need to have the following part installed:

To install change to the source directory and type: python setup.py install --prefix /usr/local You may substitute /usr/local with some other directory. If you do so make sure that some-other-directory/lib/python2.5/site-packages/ is in your PYTHONPATH, e.g. by typing export PYTHONPATH=some-other-directory/lib/python2.7/site-packages

You can also install via pip by pointing it at this repository. You still need SWIG and a C++ compiler.

pip install numpy
pip install git+https://github.com/sequitur-g2p/sequitur-g2p@master

Note, when installing on MacOS, you might run into issues due to the default libc being clang's one. If that is the case, try installing it with:

CPPFLAGS="-stdlib=libstdc++" pip install git+https://github.com/sequitur-g2p/sequitur-g2p@master

Using

Sequitur G2P is a data-driven grapheme-to-phoneme converter. Actually, it can be applied to any monotonous sequence translation problem, provided the source and target alphabets are small (less than 255 symbols). Data-driven means that you need to train it with example pronunciations. It has no built-in linguistic knowledge whatsoever, which means that it should work for any alphabetic language. Training takes a pronunciation dictionary and creates a model file. The model file can then be used to transcribe words that where not in the dictionary.

Here is step-by-step guide to get you started:

  1. Obtain a pronunciation dictionary for training. The format is one word per line. Each line contains the orthographic form of the word followed by the corresponding phonemic transcription. The word and all phonemes need to be separated by white space. The word and phoneme symbols may thus not contain blanks. We'll assume your training lexicon is called train.lex, and that you set aside some portion for testing purposes as test.lex, which is disjoint from train.lex.

  2. Train a model. To create a first model type:

    g2p.py --train train.lex --devel 5% --write-model model-1

    This first model will be rather poor because it is only a unigram. To create higher order models you need to run g2p.py again:

    g2p.py --model model-1 --ramp-up --train train.lex --devel 5% --write-model model-2

    Repeat this a couple of times

    g2p.py --model model-2 --ramp-up --train train.lex --devel 5% --write-model model-3
    g2p.py --model model-3 --ramp-up --train train.lex --devel 5% --write-model model-4
    ...
    
  3. Evaluate the model. To find out how accurately your model can transcribe unseen words type:

    g2p.py --model model-6 --test test.lex

  4. Transcribe new words. Prepare a list of words you want to transcribe as a simple text file words.txt with one word per line (and no phonemic transcription), then type:

    g2p.py --model model-3 --apply words.txt

Random comments:

  • You cannot open models created in a python3 environment inside a python2 environment. The opposite works.
  • Whenever a file name is required, you can specify "-" to mean standard in, or standard out.
  • If a file name ends in ".gz", it is assumed that the file is (or should be) compressed using gzip.
  • For the time being you need to type g2p.py --help and/or read the source to find out the other things g2p.py can do. Sorry about that.