The idea behind this project is to have a standalone clock circuit to debug ICs at a very low clock speed.
It is mainly inspired by Ben Eater's version.
- Manual pulse Mode.
- Variable frequency clock.
- DC Input Jack 7v - 15v @ approx. 100mA.
- Raw 5v power in for breadboard compatability.
- Lots of LEDs :)
- 2x 0.01uF - Ceramic Capacitor
- 2x 4.7uF - Capacitor
- 1x 470uF - Capacitor
- 1x .33uF - Ceramic Capacitor
- 4x .1uF - Ceramic Capacitor
- 1x 1uF - Capacitor
- 1x 1N4007 - Diode
- 4x 5mm LED
- 2x 01x02 Female Pin header
- 1x DC Jack
- 6x 1K - Resistor
- 2x 51K - Resistor
- 2x 10K - Resistor
- 1x 100K - Potentiometer linear
- 2x Button
- 3x NE555P
- 1x L7805
- 1x 7400
- Use CMOS ICs for a 5vpp output
- Add partslist
- Add photos
- Swap silkscreen position of c3 and c4
- Different footprint for c8