This is a quick and dirty MakeCode Package for SH1106 OLED controller, based on the Adafruit Arduino library available here.
It works with 128x64 displays based on the SH1106 controller. It was ported quickly, just to get something working. It is not necessarily pretty.
- Insert the OLED display into the I2C ports on the break out board.
Initializes the OLED display.
Sets up the OLED display and prepares it for use by the micro:bit.
OLED.init(64, 128);
This block must be placed before any of the show
blocks.
Displays a string on the OLED module.
OLED.showString("hello, micro:bit!")
The init
block must be placed before this.
Displays a number on the OLED module.
OLED.showNumber(123)
The init
block must be placed before this.
Clears the display.
OLED.clear()
The init
block must be placed before this.
- for PXT/microbit
MIT