JordiLazo/embedded_and_ubiquitous_systems_103056
This repository contains the code and documentation of the project carried out throughout the course of 103056 Embedded and Ubiquitous Systems at University of Lleida.
C++
Issues
- 0
2.10: Write and draft the final documentation and prepare the final power point presentation of the project
#18 opened by JordiLazo - 0
2.8: Adjust the code of the ESP-32 module to integrate it with FreeRTOS functions
#16 opened by JordiLazo - 0
2.9: Determine and implement the method that we will use to detect if a person is at risk or not due to their movement and heart rate
#17 opened by JordiLazo - 1
2.7: Write the code for the ESP-32 + Servo motor + LCD Screen to subscribe a topic and receive the data through the test.mosquitto.org server to the LCD Screen and Servo motor
#15 opened by JordiLazo - 1
- 0
2.5: Modify the Plataform IoT to adjust to the parameters received by the ESP-01 + Arduino Nano 33 BLE module and check that they are received and stored in a csv file correctly
#13 opened by JordiLazo - 0
2.4: Write the code for the ESP-01 + Arduino Nano 33 BLE to publish a topic and send the data through the test.mosquitto.org server to the Plataform IoT
#12 opened by JordiLazo - 1
- 1
2.2: Modify the Plataform IoT to adjust to the parameters received by the ESP-01 + MAX30102 heart rate sensor module and check that they are received and stored in a csv file correctly
#10 opened by JordiLazo - 1
2.1: Write the code for the MAX30102 heart rate sensor to publish a topic and send the data through the test.mosquitto.org server to the Plataform IoT
#9 opened by JordiLazo - 1
- 0
1.6: Write the code to be able to show the data transferred by the heart rate sensor in the LCD screen
#7 opened by JordiLazo - 0
- 0
1.4 Write the code to be able to read the data transferred by the temperature sensor
#5 opened by JordiLazo - 0
1.3: Write the code to be able to read the data transferred by the heart rate sensor
#4 opened by JordiLazo - 0
1.2: Configure and connect components (LCD, I2C, Arduino UNO, ESP-01,Servo, Heart rate sensor, Temperature Sensor)
#3 opened by JordiLazo - 0
1.1: Install and set up arduino IDE search and install all necessary libraries
#2 opened by JordiLazo - 0