/******************************************************************************* * * Copyright (C) 2012 Jorge Aparicio <jorge.aparicio.r@gmail.com> * * This file is part of bareCortexM. * * bareCortexM is free software: you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free * Software Foundation, either version 3 of the License, or (at your option) * any later version. * * bareCortexM is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along * with bareCortexM. If not, see <http://www.gnu.org/licenses/>. * ******************************************************************************/ ABOUT ===== bareCortexM is an Eclipse project template for bare metal development of ARM Cortex M processors. With this project you can compile, flash, run and debug code on various ARM processors and microcontrollers. Currently there is complete support for the STM32F1XX, STM32F2XX and STM32F4XX microcontrollers. DEPENDENCIES ============ This project uses extensively the following tools: + GNU Tools ARM Embedded (https://launchpad.net/gcc-arm-embedded) + Eclipse CDT (http://www.eclipse.org/) + GNU ARM plugin for Eclipse (http://sourceforge.net/projects/gnuarmeclipse/) + Zylin Embedded CDT plugin for Eclipse (http://opensource.zylin.com/embeddedcdt.html) + EmbSysRegView plugin for Eclipse (Not necessary, but recommended) (http://embsysregview.sourceforge.net/) + openOCD (http://openocd.sourceforge.net/) INSTALLATION ============ Check the wiki for the installation steps. (https://github.com/JorgeAparicio/bareCortexM/wiki) CONFIGURATION ============= You'll need to configure the project for your specific target, interface and platform. + Choose your platform. - Go to Menu > Project > Properties. - C/C++ Build. - Click the Manage Configuration button next to the Configuration combo box. - Select your platform and click the Set Active button. + Select the correct linker script. - Go to Menu > Project > Properties. - C/C++ Build > Settings. - ARM Sourcery GCC C++ Linker > General. - Type in the Script file box: ../linker/<your target>.ld - The list of supported devices is in the linker folder. + Configure OpenOCD. - Go to Menu > Run > External Tools > External Tool Configurations. - Program > OpenOCD. - On the main tab: - Verify the OpenOCD location. - Modify the argument to match your interface and target: - -f openocd/interface/<interface>.cfg -f openocd/target/<target>.cfg - The list of supported interfaces is in the folder openocd > interface. - The list of supported targets is in the folder openocd > target. + Select the correct GDB script. - Go to Menu > Run > Debug Configurations. - Zylin Embedded debug (Native) > Flash and Debug. - On the Debugger tab. - Modify the GDB script: - gdb/<your target>.script - The list of supported targets is in the gdb folder. LICENSE ======= This project is licensed under the GNU General Public License (GPL) version 3. See COPYING.GPL3.txt for more details.
JorgeAparicio/bareCortexM
An Eclipse project template for bare metal development of ARM Cortex M processors.
C++