Homebridge Tapo Platform Plugin

This is a Homebridge platform plugin for the TP-Link Tapo P100, P105, P110 Plugs and L510E, L530E Lightbulbs.

Following features are supported per Device:

P100 : Turn On, Turn Off, Current State.
P110 : Same as P100 + Power Consumption in Eve App.
L510E: Same as P100 + Brightness control
L530E: Same as L510E + Hue and Saturation control, Adaptive Lighting support and Power Consumption in Eve App.

Tested with:

Tapo P100 (EU, UK)
Tapo L510E
Tapo L530E

Installation

Install homebridge
Install this plugin using: npm install -g homebridge-tapo or through Homebridge UI
Update your Homebridge configuration file (config.json)

Configuration

The available fields in the config.json file are:

platform [required] Always "TapoP100"
name [required] Descriptive name of the platform
username [required] The username with which you registered/login in the Tapo app.
password: [required] The password with which you registered/login in the Tapo app
devices: [required] An array of devices
- name: [required] The name of each device
- host: [required] The host (local IP address) of each device
- type: [optional] Plug, PowerPlug, Light or Colorlight. Use Plug for P100 or P105, PowerPlug for P110, Light for L510E and Colorlight for L530. If not provided, default is Plug.
- updateInterval: [optional] seconds. Set the update interval for the plugin. Determines how often the plugin will request the state from the Tapo Device.
- timeout: [optional] seconds. Sets the request timeout header for the requests to the Tapo Device.

Example:

"platforms": [
    {
        "name": "Tapo Smart Platform",
        "username": "the username from the Tapo app",
        "password": "the password from the Tapo app",
        "platform": "TapoP100",
        "devices": [
            {
                "name": "Kitchen",
                "host": "192.168.1.21",
                "type": "Plug",
                "updateInterval": 30,
                "timeout": 2
            }
        ]
    }
]

How does it work?

The plugin polls this outlet endpoint:

http://[host]/app?token

Example response from this endpoint:

{
"device_id":"",
"fw_ver":"1.2.1 Build 20200616 Rel. 31218",
"hw_ver":"1.20.0",
"model":"P100",
"type":"SMART.TAPOPLUG",
"mac":"",
"hw_id":"",
"fw_id":"",
"oem_id":"",
"specs":"EU",
"device_on":false,
"on_time":0,
"overheated":false,
"nickname":"",
"location":"kitchen",
"avatar":"ceiling_lamp",
"time_usage_today":515,
"time_usage_past7":3102,
"time_usage_past30":3102,
"longitude":,
"latitude":,
"has_set_location_info":false,
"ip":"",
"ssid":"",
"signal_level":2,
"rssi":-61,
"region":"Europe/Athens",
"time_diff":120,
"lang":"en_US"}}

Information

This plugin will also allow you to control the Tapo Plugs and Lights even if you have blocked the internet connectivity of the device.

I created the plugin for personal use and wanted to share it with other people too.

Maybe you would consider buying me a coffee

Thanks / Credits