##How to install the Script?
- Put the script.lua file on your Taranis SD-Card at "\SCRIPTS\TELEMETRY"
- Edit your OpenTX Model and add the script to a telemetry page
- Go out and shoot some 360° Panorama!
##How to setup the Script?
You need to edit the script and set the channel of your Pitch and Yaw Axis of your Gimbal as well as the Channel for your Camera Shutter.
local shutCh = 4 = Shutter @ Channel 4
local yawCh = 3 = Yaw @ Channel 3
local pitchCh = 2 = Pitch @ Channel 2
##How to tune the Script?
The script adds custom inputs at Input17 on your Taranis that you can edit to adapt it to your gimbal
You can set the speed of one gimbal roation step with the inputs yawVal and pitchVal, default is 10 (Max. PWM)
You can set the duration of one gimbal roation step with the parameters pitchDur and yawDur, default is 10 (1sec)
You can set the amount of steps for one 360° rotation with the parameters yawStp and pitchStp
###Advanced Setup
The script uses 3 Special Functions at index 60,61 and 62 as default, you can change them with the parameters shutCFIndex, yawCFIndex and pitchCFIndex if you want, but there is no need to if you aren't using them.
The script inserts inputs at at index 16 (Input17) at default. If you already use this input, you can change the index with the inputIndex parameter.