/mochimqtt

The fully compliant, embeddable high-performance Go MQTT v5 server for IoT, smarthome, and pubsub

Primary LanguageGoMIT LicenseMIT

build status Coverage Status Go Report Card Go Reference contributions welcome

Mochi MQTT Broker

The fully compliant, embeddable high-performance Go MQTT v5 (and v3.1.1) broker server

Mochi MQTT is an embeddable fully compliant MQTT v5 broker server written in Go, designed for the development of telemetry and internet-of-things projects. The server can be used either as a standalone binary or embedded as a library in your own applications, and has been designed to be as lightweight and fast as possible, with great care taken to ensure the quality and maintainability of the project.

What is MQTT?

MQTT stands for MQ Telemetry Transport. It is a publish/subscribe, extremely simple and lightweight messaging protocol, designed for constrained devices and low-bandwidth, high-latency or unreliable networks (Learn more). Mochi MQTT fully implements version 5.0.0 of the MQTT protocol.

What's new in Version 2?

Version 2.0.0 takes all the great things we loved about Mochi MQTT v1.0.0, learns from the mistakes, and improves on the things we wished we'd had. It's a total from-scratch rewrite, designed to fully implement MQTT v5 as a first-class feature.

Don't forget to use the new v2 import paths:

import "github.com/mochi-co/mqtt/v2"
  • Full MQTTv5 Feature Compliance, compatibility for MQTT v3.1.1 and v3.0.0:
    • User and MQTTv5 Packet Properties
    • Topic Aliases
    • Shared Subscriptions
    • Subscription Options and Subscription Identifiers
    • Message Expiry
    • Client Session Expiry
    • Send and Receive QoS Flow Control Quotas
    • Server-side Disconnect and Auth Packets
    • Will Delay Intervals
    • Plus all the original MQTT features of Mochi MQTT v1, such as Full QoS(0,1,2), $SYS topics, retained messages, etc.
  • Developer-centric:
    • Most core broker code is now exported and accessible, for total developer control.
    • Full-featured and flexible Hook-based interfacing system to provide easy 'plugin' development.
    • Direct Packet Injection using special inline client, or masquerade as existing clients.
  • Performant and Stable:
    • Our classic trie-based Topic-Subscription model.
    • Client-specific write buffers to avoid issues with slow-reading or irregular client behaviour.
    • Passes all Paho Interoperability Tests for MQTT v5 and MQTT v3.
    • Over a thousand carefully considered unit test scenarios.
  • TCP, Websocket (including SSL/TLS), and $SYS Dashboard listeners.
  • Built-in Redis, Badger, and Bolt Persistence using Hooks (but you can also make your own).
  • Built-in Rule-based Authentication and ACL Ledger using Hooks (also make your own).

There is no upgrade path from v1.0.0. Please review the documentation and this readme to get a sense of the changes required (e.g. the v1 events system, auth, and persistence have all been replaced with the new hooks system).

Compatibility Notes

Because of the overlap between the v5 specification and previous versions of mqtt, the server can accept both v5 and v3 clients, but note that in cases where both v5 an v3 clients are connected, properties and features provided for v5 clients will be downgraded for v3 clients (such as user properties).

Support for MQTT v3.0.0 and v3.1.1 is considered hybrid-compatibility. Where not specifically restricted in the v3 specification, more modern and safety-first v5 behaviours are used instead - such as expiry for inflight and retained messages, and clients - and quality-of-service flow control limits.

Roadmap

  • Please open an issue to request new features or event hooks!
  • Cluster support.
  • Enhanced Metrics support.
  • File-based server configuration (supporting docker).

Quick Start

Running the Broker with Go

Mochi MQTT can be used as a standalone broker. Simply checkout this repository and run the cmd/main.go entrypoint in the cmd folder which will expose tcp (:1883), websocket (:1882), and dashboard (:8080) listeners.

cd cmd
go build -o mqtt && ./mqtt

Using Docker

A simple Dockerfile is provided for running the cmd/main.go Websocket, TCP, and Stats server:

docker build -t mochi:latest .
docker run -p 1883:1883 -p 1882:1882 -p 8080:8080 mochi:latest

Developing with Mochi MQTT

Importing as a package

Importing Mochi MQTT as a package requires just a few lines of code to get started.

import (
  "log"

  "github.com/mochi-co/mqtt/v2"
  "github.com/mochi-co/mqtt/v2/hooks/auth"
  "github.com/mochi-co/mqtt/v2/listeners"
)

func main() {
  // Create the new MQTT Server.
  server := mqtt.New(nil)
  
  // Allow all connections.
  _ = server.AddHook(new(auth.AllowHook), nil)
  
  // Create a TCP listener on a standard port.
  tcp := listeners.NewTCP("t1", ":1883", nil)
  err := server.AddListener(tcp)
  if err != nil {
    log.Fatal(err)
  }
  
  err = server.Serve()
  if err != nil {
    log.Fatal(err)
  }
}

Examples of running the broker with various configurations can be found in the examples folder.

Network Listeners

The server comes with a variety of pre-packaged network listeners which allow the broker to accept connections on different protocols. The current listeners are:

Listener Usage
listeners.NewTCP A TCP listener
listeners.NewUnixSock A Unix Socket listener
listeners.NewNet A net.Listener listener
listeners.NewWebsocket A Websocket listener
listeners.NewHTTPStats An HTTP $SYS info dashboard
listeners.NewHTTPHealthCheck An HTTP healthcheck listener to provide health check responses for e.g. cloud infrastructure

Use the listeners.Listener interface to develop new listeners. If you do, please let us know!

A *listeners.Config may be passed to configure TLS.

Examples of usage can be found in the examples folder or cmd/main.go.

Server Options and Capabilities

A number of configurable options are available which can be used to alter the behaviour or restrict access to certain features in the server.

server := mqtt.New(&mqtt.Options{
  Capabilities: mqtt.Capabilities{
    MaximumSessionExpiryInterval: 3600,
    Compatibilities: mqtt.Compatibilities{
      ObscureNotAuthorized: true,
    },
  },
  ClientNetWriteBufferSize: 4096,
  ClientNetReadBufferSize: 4096,
  SysTopicResendInterval: 10,
})

Review the mqtt.Options, mqtt.Capabilities, and mqtt.Compatibilities structs for a comprehensive list of options. ClientNetWriteBufferSize and ClientNetReadBufferSize can be configured to adjust memory usage per client, based on your needs.

Event Hooks

A universal event hooks system allows developers to hook into various parts of the server and client life cycle to add and modify functionality of the broker. These universal hooks are used to provide everything from authentication, persistent storage, to debugging tools.

Hooks are stackable - you can add multiple hooks to a server, and they will be run in the order they were added. Some hooks modify values, and these modified values will be passed to the subsequent hooks before being returned to the runtime code.

Type Import Info
Access Control mochi-co/mqtt/hooks/auth . AllowHook Allow access to all connecting clients and read/write to all topics.
Access Control mochi-co/mqtt/hooks/auth . Auth Rule-based access control ledger.
Persistence mochi-co/mqtt/hooks/storage/bolt Persistent storage using BoltDB (deprecated).
Persistence mochi-co/mqtt/hooks/storage/badger Persistent storage using BadgerDB.
Persistence mochi-co/mqtt/hooks/storage/redis Persistent storage using Redis.
Debugging mochi-co/mqtt/hooks/debug Additional debugging output to visualise packet flow.

Many of the internal server functions are now exposed to developers, so you can make your own Hooks by using the above as examples. If you do, please Open an issue and let everyone know!

Access Control

Allow Hook

By default, Mochi MQTT uses a DENY-ALL access control rule. To allow connections, this must overwritten using an Access Control hook. The simplest of these hooks is the auth.AllowAll hook, which provides ALLOW-ALL rules to all connections, subscriptions, and publishing. It's also the simplest hook to use:

server := mqtt.New(nil)
_ = server.AddHook(new(auth.AllowHook), nil)

Don't do this if you are exposing your server to the internet or untrusted networks - it should really be used for development, testing, and debugging only.

Auth Ledger

The Auth Ledger hook provides a sophisticated mechanism for defining access rules in a struct format. Auth ledger rules come in two forms: Auth rules (connection), and ACL rules (publish subscribe).

Auth rules have 4 optional criteria and an assertion flag:

Criteria Usage
Client client id of the connecting client
Username username of the connecting client
Password password of the connecting client
Remote the remote address or ip of the client
Allow true (allow this user) or false (deny this user)

ACL rules have 3 optional criteria and an filter match:

Criteria Usage
Client client id of the connecting client
Username username of the connecting client
Remote the remote address or ip of the client
Filters an array of filters to match

Rules are processed in index order (0,1,2,3), returning on the first matching rule. See hooks/auth/ledger.go to review the structs.

server := mqtt.New(nil)
err := server.AddHook(new(auth.Hook), &auth.Options{
    Ledger: &auth.Ledger{
    Auth: auth.AuthRules{ // Auth disallows all by default
      {Username: "peach", Password: "password1", Allow: true},
      {Username: "melon", Password: "password2", Allow: true},
      {Remote: "127.0.0.1:*", Allow: true},
      {Remote: "localhost:*", Allow: true},
    },
    ACL: auth.ACLRules{ // ACL allows all by default
      {Remote: "127.0.0.1:*"}, // local superuser allow all
      {
        // user melon can read and write to their own topic
        Username: "melon", Filters: auth.Filters{
          "melon/#":   auth.ReadWrite,
          "updates/#": auth.WriteOnly, // can write to updates, but can't read updates from others
        },
      },
      {
        // Otherwise, no clients have publishing permissions
        Filters: auth.Filters{
          "#":         auth.ReadOnly,
          "updates/#": auth.Deny,
        },
      },
    },
  }
})

The ledger can also be stored as JSON or YAML and loaded using the Data field:

err = server.AddHook(new(auth.Hook), &auth.Options{
    Data: data, // build ledger from byte slice: yaml or json
})

See examples/auth/encoded/main.go for more information.

Persistent Storage

Redis

A basic Redis storage hook is available which provides persistence for the broker. It can be added to the server in the same fashion as any other hook, with several options. It uses github.com/go-redis/redis/v8 under the hook, and is completely configurable through the Options value.

err := server.AddHook(new(redis.Hook), &redis.Options{
  Options: &rv8.Options{
    Addr:     "localhost:6379", // default redis address
    Password: "",               // your password
    DB:       0,                // your redis db
  },
})
if err != nil {
  log.Fatal(err)
}

For more information on how the redis hook works, or how to use it, see the examples/persistence/redis/main.go or hooks/storage/redis code.

Badger DB

There's also a BadgerDB storage hook if you prefer file based storage. It can be added and configured in much the same way as the other hooks (with somewhat less options).

err := server.AddHook(new(badger.Hook), &badger.Options{
  Path: badgerPath,
})
if err != nil {
  log.Fatal(err)
}

For more information on how the badger hook works, or how to use it, see the examples/persistence/badger/main.go or hooks/storage/badger code.

There is also a BoltDB hook which has been deprecated in favour of Badger, but if you need it, check examples/persistence/bolt/main.go.

Developing with Event Hooks

Many hooks are available for interacting with the broker and client lifecycle. The function signatures for all the hooks and mqtt.Hook interface can be found in hooks.go.

The most flexible event hooks are OnPacketRead, OnPacketEncode, and OnPacketSent - these hooks be used to control and modify all incoming and outgoing packets.

Function Usage
OnStarted Called when the server has successfully started.
OnStopped Called when the server has successfully stopped.
OnConnectAuthenticate Called when a user attempts to authenticate with the server. An implementation of this method MUST be used to allow or deny access to the server (see hooks/auth/allow_all or basic). It can be used in custom hooks to check connecting users against an existing user database. Returns true if allowed.
OnACLCheck Called when a user attempts to publish or subscribe to a topic filter. As above.
OnSysInfoTick Called when the $SYS topic values are published out.
OnConnect Called when a new client connects, may return an error or packet code to halt the client connection process.
OnSessionEstablished Called when a new client successfully establishes a session (after OnConnect)
OnDisconnect Called when a client is disconnected for any reason.
OnAuthPacket Called when an auth packet is received. It is intended to allow developers to create their own mqtt v5 Auth Packet handling mechanisms. Allows packet modification.
OnPacketRead Called when a packet is received from a client. Allows packet modification.
OnPacketEncode Called immediately before a packet is encoded to be sent to a client. Allows packet modification.
OnPacketSent Called when a packet has been sent to a client.
OnPacketProcessed Called when a packet has been received and successfully handled by the broker.
OnSubscribe Called when a client subscribes to one or more filters. Allows packet modification.
OnSubscribed Called when a client successfully subscribes to one or more filters.
OnSelectSubscribers Called when subscribers have been collected for a topic, but before shared subscription subscribers have been selected. Allows receipient modification.
OnUnsubscribe Called when a client unsubscribes from one or more filters. Allows packet modification.
OnUnsubscribed Called when a client successfully unsubscribes from one or more filters.
OnPublish Called when a client publishes a message. Allows packet modification.
OnPublished Called when a client has published a message to subscribers.
OnPublishDropped Called when a message to a client is dropped before delivery, such as if the client is taking too long to respond.
OnRetainMessage Called then a published message is retained.
OnRetainPublished Called then a retained message is published to a client.
OnQosPublish Called when a publish packet with Qos >= 1 is issued to a subscriber.
OnQosComplete Called when the Qos flow for a message has been completed.
OnQosDropped Called when an inflight message expires before completion.
OnPacketIDExhausted Called when a client runs out of unused packet ids to assign.
OnWill Called when a client disconnects and intends to issue a will message. Allows packet modification.
OnWillSent Called when an LWT message has been issued from a disconnecting client.
OnClientExpired Called when a client session has expired and should be deleted.
OnRetainedExpired Called when a retained message has expired and should be deleted.
StoredClients Returns clients, eg. from a persistent store.
StoredSubscriptions Returns client subscriptions, eg. from a persistent store.
StoredInflightMessages Returns inflight messages, eg. from a persistent store.
StoredRetainedMessages Returns retained messages, eg. from a persistent store.
StoredSysInfo Returns stored system info values, eg. from a persistent store.

If you are building a persistent storage hook, see the existing persistent hooks for inspiration and patterns. If you are building an auth hook, you will need OnACLCheck and OnConnectAuthenticate.

Direct Publish

To publish basic message to a topic from within the embedding application, you can use the server.Publish(topic string, payload []byte, retain bool, qos byte) error method.

err := server.Publish("direct/publish", []byte("packet scheduled message"), false, 0)

The Qos byte in this case is only used to set the upper qos limit available for subscribers, as per MQTT v5 spec.

Packet Injection

If you want more control, or want to set specific MQTT v5 properties and other values you can create your own publish packets from a client of your choice. This method allows you to inject MQTT packets (no just publish) directly into the runtime as though they had been received by a specific client. Most of the time you'll want to use the special client flag inline=true, as it has unique privileges: it bypasses all ACL and topic validation checks, meaning it can even publish to $SYS topics.

Packet injection can be used for any MQTT packet, including ping requests, subscriptions, etc. And because the Clients structs and methods are now exported, you can even inject packets on behalf of a connected client (if you have a very custom requirements).

cl := server.NewClient(nil, "local", "inline", true)
server.InjectPacket(cl, packets.Packet{
  FixedHeader: packets.FixedHeader{
    Type: packets.Publish,
  },
  TopicName: "direct/publish",
  Payload: []byte("scheduled message"),
})

MQTT packets still need to be correctly formed, so refer our the test packets catalogue and MQTTv5 Specification for inspiration.

See the hooks example to see this feature in action.

Testing

Unit Tests

Mochi MQTT tests over a thousand scenarios with thoughtfully hand written unit tests to ensure each function does exactly what we expect. You can run the tests using go:

go run --cover ./...

Paho Interoperability Test

You can check the broker against the Paho Interoperability Test by starting the broker using examples/paho/main.go, and then running the mqtt v5 and v3 tests with python3 client_test5.py from the interoperability folder.

Note that there are currently a number of outstanding issues regarding false negatives in the paho suite, and as such, certain compatibility modes are enabled in the paho/main.go example.

Performance Benchmarks

Mochi MQTT performance is comparable with popular brokers such as Mosquitto, EMQX, and others.

Performance benchmarks were tested using MQTT-Stresser on a Apple Macbook Air M2, using cmd/main.go default settings. Taking into account bursts of high and low throughput, the median scores are the most useful. Higher is better.

The values presented in the benchmark are not representative of true messages per second throughput. They rely on an unusual calculation by mqtt-stresser, but are usable as they are consistent across all brokers. Benchmarks are provided as a general performance expectation guideline only. Comparisons are performed using out-of-the-box default configurations.

mqtt-stresser -broker tcp://localhost:1883 -num-clients=2 -num-messages=10000

Broker publish fastest median slowest receive fastest median slowest
Mochi v2.2.10 124,772 125,456 124,614 314,461 313,186 311,910
Mosquitto v2.0.15 155,920 155,919 155,918 185,485 185,097 184,709
EMQX v5.0.11 156,945 156,257 155,568 17,918 17,783 17,649
Rumqtt v0.21.0 112,208 108,480 104,753 135,784 126,446 117,108

mqtt-stresser -broker tcp://localhost:1883 -num-clients=10 -num-messages=10000

Broker publish fastest median slowest receive fastest median slowest
Mochi v2.2.10 41,825 31,663 23,008 144,058 65,903 37,618
Mosquitto v2.0.15 42,729 38,633 29,879 23,241 19,714 18,806
EMQX v5.0.11 21,553 17,418 14,356 4,257 3,980 3,756
Rumqtt v0.21.0 42,213 23,153 20,814 49,465 36,626 19,283

Million Message Challenge (hit the server with 1 million messages immediately):

mqtt-stresser -broker tcp://localhost:1883 -num-clients=100 -num-messages=10000

Broker publish fastest median slowest receive fastest median slowest
Mochi v2.2.10 13,532 4,425 2,344 52,120 7,274 2,701
Mosquitto v2.0.15 3,826 3,395 3,032 1,200 1,150 1,118
EMQX v5.0.11 4,086 2,432 2,274 434 333 311
Rumqtt v0.21.0 78,972 5,047 3,804 4,286 3,249 2,027

Not sure what's going on with EMQX here, perhaps the docker out-of-the-box settings are not optimal, so take it with a pinch of salt as we know for a fact it's a solid piece of software.

Contribution Guidelines

Contributions and feedback are both welcomed and encouraged! Open an issue to report a bug, ask a question, or make a feature request. If you open a pull request, please try to follow the following guidelines:

  • Try to maintain test coverage where reasonably possible.
  • Clearly state what the PR does and why.
  • Remember to add your SPDX FileContributor tag to files where you have made a meaningful contribution.

SPDX Annotations are used to clearly indicate the license, copyright, and contributions of each file in a machine-readable format. If you are adding a new file to the repository, please ensure it has the following SPDX header:

// SPDX-License-Identifier: MIT
// SPDX-FileCopyrightText: 2022 mochi-co
// SPDX-FileContributor: Your name or alias <optional@email.address>

package name

Please ensure to add a new SPDX-FileContributor line for each contributor to the file. Refer to other files for examples. Please remember to do this, your contributions to this project are valuable and appreciated - it's important to receive credit!

Stargazers over time 🥰

Stargazers over time Are you using Mochi MQTT in a project? Let us know!