K0RSHAK/serial-connector

Serial Port Connector

Installation

pip install git+https://github.com/edpryk/serial-connector

---

Description

CLI tool to communicate with a serial port.
Three modes can be used:

• dist serial output will be routed to the serial_output.txt, user can send data through the stdin
• shell serial output will be routed to the stdout, user can send data through the stdin
• only-out serial output will be routed to the stdout

Manual:

usage: serialc [-h] [-p PORT] [-b BAUD] [-m {shell,dist,only-out}] [-S STOP] [-P {1,1.5,2}] [-B BYTE_SIZE] [-t READ_TIMEOUT] [-r READ_EXACT] [-d DECODE]

optional arguments:
  -h, --help            show this help message and exit
  -p PORT, --port PORT  Target port, Example: /dev/ttyUSB0
  -b BAUD, --baud BAUD  Baud Rate
  -m {shell,dist,only-out}, --mode {shell,dist,only-out}
                        Mode
  -S STOP, --stop STOP  Stop Bit 1
  -P {1,1.5,2}, --parity {1,1.5,2}
                        Parity Bit
  -B BYTE_SIZE, --byte-size BYTE_SIZE
                        Byte Size
  -t READ_TIMEOUT, --read-timeout READ_TIMEOUT
                        Read Timeout
  -r READ_EXACT, --read_exact READ_EXACT
                        Read exact amount of bytes
  -d DECODE, --decode DECODE
                        Decode to exact encoding, leave empty string to skip

Press Ctrl+D to send data.

---

Summary

• Written to communicate with AVR boards
• Tested with the atmega328p

---