K4LCIFER/thermometer-digital-min_max

Issues

• Change the shape of the pcb to fit to the interior of the case, rather than fitting the case to the shape of the pcb.

  #21 opened 2 years ago by K4LCIFER
  0

• The mounting hole in the top left corner of the PCB is slightly out of allignment

  #19 opened 2 years ago by K4LCIFER
  0

• Make sure the traces are the proper thickness

  #7 opened 2 years ago by K4LCIFER
  1

• Add a bypass capacitor the MCU

  #5 opened 2 years ago by K4LCIFER
  1

• Simplify PCB to SMD components

  #3 opened 2 years ago by K4LCIFER
  0

• Switch to JST connectors instead of the male header pins

  #6 opened 2 years ago by K4LCIFER
  0

• Add a link to the KiCAD website when mentioning it in the KiCAD project files README

  #17 opened 2 years ago by K4LCIFER
  0

• Add a PCB specifications file

  #14 opened 2 years ago by K4LCIFER
  0

• Add resources folder with documentation/datasheets

  #8 opened 2 years ago by K4LCIFER
  0

• Add a parts list

  #10 opened 2 years ago by K4LCIFER
  0

• Add a README to the PCB subfolder to describe the PCB and what that part contains.

  #13 opened 2 years ago by K4LCIFER
  0

• Add a readme that gives brief info on the software used for PCB design.

  #15 opened 2 years ago by K4LCIFER
  0

• Unused pins should be tied to GND

  #11 opened 2 years ago by K4LCIFER
  1

• Change the PCB from 4 layers to 2 layers?

  #1 opened 2 years ago by K4LCIFER
  1

• The PCB is not center justified.

  #4 opened 2 years ago by K4LCIFER
  2

• Move the PCB files to an electronics folder, and the case files to a hardware folder

  #2 opened 2 years ago by K4LCIFER
  0