KCL-BMEIS/spectrumdevice

Issues

• Digitiser Values

  #57 opened 7 months ago by clemc98
  0

• FIFO mode: coercing length to nearest

  #54 opened 9 months ago by ascnave
  2

• triggering source on the analog channels

  #52 opened 10 months ago by ascnave
  3

• decode_status() doesn't work

  #53 opened 10 months ago by crnbaker
  0

• Improve AWG and pulse gen API docs

  #50 opened 10 months ago by crnbaker
  0

• Testing new examples on hardware

  #48 opened 10 months ago by crnbaker
  0

• Improve AWG and pulse gen examples and update README

  #46 opened 10 months ago by crnbaker
  0

• Implement pulse generator functionality

  #42 opened 10 months ago by crnbaker
  0

• Update pyspcm

  #43 opened 10 months ago by crnbaker
  0

• Support for arbitrary waveform generators

  #26 opened 10 months ago by crnbaker
  0

• Implement synchronous digital outputs for AWG

  #40 opened 10 months ago by crnbaker
  0

• Python 3.12

  #38 opened a year ago by crnbaker
  0

• New features in AcquisitionSetting

  #34 opened a year ago by clemc98
  2

• Package unworking

  #33 opened a year ago by clemc98
  2

• Software averaging

  #30 opened a year ago by crnbaker
  0

• Improve timestamp acquisition

  #32 opened a year ago by crnbaker
  0

• Improve error handling

  #13 opened a year ago by crnbaker
  0

• Enable firmware averaging

  #19 opened a year ago by crnbaker
  0

• fix hardware testing on single card

  #24 opened a year ago by crnbaker
  0

• Python 3.11 support

  #21 opened 2 years ago by crnbaker
  0

• Crash when enabled channels not provided in correct order (star hub)

  #20 opened 2 years ago by crnbaker
  0

• Provide trigger timestamps

  #16 opened 3 years ago by crnbaker
  0

• Converting ADC samples to voltage values

  #14 opened 3 years ago by crnbaker
  0

• Coercion of `SPC_MEMSIZE` and `SPC_POSTTRIGGER` values to nearest 8 samples only valid for M2p.59xx cards.

  #9 opened 3 years ago by crnbaker
  0

• In `get_waveforms()`, buffer marked as available before data is read

  #8 opened 3 years ago by crnbaker
  0

• Pre-release testing on hardware

  #6 opened 3 years ago by crnbaker
  1

• Convert from setup.py to setup.cfg and pyproject.toml

  #4 opened 3 years ago by crnbaker
  0